Illustration of how to repair toilet drain valves

Materials required: slotted taper, rubber sheet, double-sided tape.

The drain valve is broken and leaking, because the sealing ring of the drain valve is not well sealed because of too long, we need to open the water tank of the toilet, find the drain valve, remove the sealing ring of the drain valve, glue the thin sheet to the bottom of the sealing ring with double-sided tape, fix it and then install the sealing ring back, and the drainage valve will be repaired.

1. First of all, open the lid of the toilet tank, so that you can see the toilet flush valve group.

2. Pull the toilet suction valve group up to take out the valve group.

3. The blue cover of the valve group can be removed from the outward mouth.

4. After that, you can see the pumping valve of the toilet hail pumping assembly, and remove the gasket under the dense bridge sealing ring.

5. Glue the sheet to the bottom of the sealing gasket with double-sided tape, and then put the sealing ring back so that the drain valve is repaired.

Precautions: 1. Before repairing, close the water valve at home in advance to avoid splashing water on your body.

2. If there is still water leakage after repair, you should find a professional for repair.