Illustration of how to disassemble a kitchen faucet

1. Close the sluice gate of the house.

To avoid unnecessary hassle before replacing the faucet, be sure to close the sluice gate in your house to avoid water spraying.

2. Wait for the residual water to drain out.

After the sluice gate is closed, wait a while to make sure that the remaining water in the tap has been drained before proceeding, and of course, you can also use paper towels or towels to absorb water directly to save time, and the drainage progress can also be accelerated.

3. Pry open the protective sheet.

After the water is drained, you can operate, use a knife to pry the protective piece on the faucet handle, this step is relatively simple, because this protective piece is generally directly put on or glued on.

4. Unscrew the screws.

Shine on the corresponding model of screwdriver, look in the direction, and unscrew the screws of the faucet handle.

5. Remove the faucet.

The faucet can be removed after the screw is unscrewed, and the faucet handle is generally fixed by occlusion tooth patterns, and it can be removed with force.

6. Complete the disassembly.

After the faucet is removed, the lower hinge can be opened to achieve disassembly, after the disassembly is completed, the relevant tools should be sorted out in time, and the disassembled things should be put away.

How to dismantle the kitchen faucet, the in-wall kitchen faucet, simple and easy to understand.

Answer method: Use a blade to cut the glass glue around the basin, and the basin can be taken down, If you want to change the valve core, you can replace the valve core if you can find the same valve core, Disassembly method: 1. Take off a sign indicating the hot and cold water behind the faucet handle, 2. Use a screwdriver to loosen the screws inside from this small hole and remove the handle, 3. Unscrew the decorative cover, and use a movable wrench to unscrew the valve core fixing screw, and you can remove the valve core I hope my answer will help you!

Twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grasp one hose and twist it counterclockwise from the bottom of the faucet.

Prepare the tools you need, such as pliers, wrenches and screwdrivers, and if you only need to replace the faucet parts, then you need to prepare the parts that need to be replaced, and turn off the main valve.

If the screws of the faucet are attached under a plastic sheet, plastic button, or metal button, the handle screws mounted on the top of the faucet can be removed by simply opening the button.

In the process of replacement, some water inlet hoses have been used for a long time, and there will be rust or catalytic fasteners, so that the water inlet hose can not be unscrewed, in this case, you can drip oil on the rusty place, and then take out the basin faucet.

Find a plumber, I can't explain it...

It's so easy, I make this every day, there are screws and nuts under the sink, and you can unscrew it when you turn to the left, or you can turn it to the right on the top. If you have more questions, you can click on ID to consult.

1.Close the water source valve. Find the kitchen water source valve and close it to avoid the flow of water into the faucet.

2.Remove the handle. Usually there will be a screw cap and a screw on the handle, which can be loosened with a screwdriver and removed from the balance.

3.Remove the spool. The valve core is usually installed on the faucet. In most faucets, the spool can be removed by inserting it down and turning it left or right. If you get stuck, you may need to gently loosen it with a wrench or pliers.

4.Remove the base. The base is usually located at the lower end of the bucket. You can use a wrench or pliers to loosen the screws that hold the base in place. Since some bases may get stuck due to prolonged use, make sure to use enough force to loosen it.

5.Replacement parts. Among the parts that have been removed, those that are susceptible to wear and tear include springs, seals and lubricating oils. If these parts are found to be damaged or worn, replace them with new ones.

6.Reassemble. Reassemble the faucets in reverse order. Make sure all parts are installed correctly and tightened.

7.Test. Open the water valve to make sure the faucet is working properly. If there are no leaks or other issues, then your faucet should now be functional.

Tools: screwdrivers, wrenches and pliers. Here's how.

1.Remove the small screws on or behind the faucet handle, and then remove the handle that is fixed to the faucet body. A small number of faucet screws will be under the plastic buttons, metal buttons or plastic sheets, and as soon as the buttons are opened, you will see the handle screws mounted on the top.

For faucets that have been used for a long time or have not been used for a long time, its screws may become very tight due to rust and other reasons, if this happens, you can choose to drip some lubricating oil into it.

2.If the screw is hidden in the hole, it is recommended to use a flashlight to observe, which is mainly to see if the fixing screw inside is a cross or a slot, and then use the corresponding screwdriver to loosen. The screw of a few brands of faucets is an inner square hole, which is more troublesome to disassemble, and special attention should be paid not to damage the screw mouth when using alternative tools.

When the screw is released, the handle can be removed.

3.At this point, you will see a large copper nut, first remove the nut with a large movable wrench, and then you can remove the spool of the faucet. Observe whether the copper plane under the spool is uneven and free of fine sand particles, and remove it cleanly.

Kitchen faucet hose a bai

Generally, first of all, we should fix the water faucet head with a rubber pad, from the top to the bottom of the water cold hole capacity, and then use a hollow flange child near the bottom of the faucet tail faucet to tighten the wire buckle clockwise with the disc body to connect with the disc body strong and firm, and then tighten the interface between the end of the hose and the bottom of the faucet clockwise.

How do you dismantle a kitchen faucet? You can easily replace the kitchen faucet by yourself.

How to disassemble the kitchen faucet, if the faucet is blocked, it is not necessary to use that thin steel wire to dissolve, because the installed faucet has a plane diagram, according to the specifications of the schematic diagram and the specifications of the room is installed on it.

1. The first step is to prepare the required tools, the required tools are pliers, wrenches and screwdrivers, if you only need to replace the faucet parts, then you also need to prepare the parts that need to be replaced, and then turn off the main valve.

2. Remove the small screws behind or above the faucet, remove the handle fixed on the faucet, some faucet screws are installed under the plastic sheet, plastic button or metal button, in this case, you only need to open the button to remove the handle screw installed on the top of the faucet.

3. If the screws of your faucet are installed in the hole, you can first use a flashlight to see whether the screws inside are slotted or cross-mouthed, and then use the corresponding screwdriver to disassemble them. Some faucets use inner square hole screws, which are a little troublesome to disassemble, and you must pay attention not to damage the screw mouth during the disassembly process.

4. After removing the nut with a movable wrench, you can remove the valve core of the faucet. After removal, observe whether the copper plane under the valve core is uneven or sandy, and if so, it should be clear and clean.

There is no need to disassemble other accessories, twist the two hoses counterclockwise from the angle valve, take out the whole faucet, and then grab a hose from the bottom of the faucet and twist it out counterclockwise.

1. We all know that there is generally a general switch under the kitchen faucet, and the total switch can be turned off before replacement. In general, the first step is to turn off the main switch and cut off the water source.

2. After turning off the water source switch, please go to the water injection pipe to find the interface of the faucet, pinch the metal joint above the water pipe, rotate it a few times to the left and right, and remove the old faucet.

3. After the water pipe is removed, put it aside, this is what you will find, the joints and walls of these water pipes are very dirty, and there are such pipes in the hardware store, you can replace the original old pipes. Because the original pipes have been weathered for a long time, leaking, etc., so you can also replace them while changing the faucet.

4. After removing the water pipe, please hold the faucet with your hands, and then rotate it left and right to loosen the faucet.

5. After loosening the faucet, you can easily remove the plastic knob under the faucet. Then the entire faucet can be removed.

6. Install the new faucet directly, and then turn on the general switch to test its use.

A faucet faucet is a valve that controls the flow of water. The upgrading speed of faucets is very fast, from the old cast iron process to the electroplating knob type, and then to the stainless steel single temperature single control, now in many families, stainless steel double temperature double control faucets, but also the emergence of kitchen combination faucets. Nowadays, more and more consumers will consider the material, function, shape and other aspects of faucets.

The main raw material of the faucet is copper and zinc alloy. Usually hot faucets have a red light or symbol, while cold faucets usually have a blue or green light or symbol. In English-speaking countries, faucets are also often marked with an "H" or "C" for hot or cold.

Most residential, commercial and industrial houses have a faucet in front of the door, and they are equipped with a switch with a square hole to prevent passers-by from using water indiscriminately.