-
Anonymous users2024-01-23Bathroom screens are installed as follows.
1. Assemble the yarn box, air groove and pad bottom, and then screw it on with six screws to make it a square frame.
2. Put the screen window in the installation part, pay attention to the left and right air grooves and the margins of the door and window frames should be symmetrical, and the bottom position should be about 5cm lower than the frame of the door and window frames.
3. Use an electric drill with a drill bit to drill holes in the inner side of the leather strip of the door and window frame.
4. Punch 6 to 14 holes in the left and right air grooves and the corresponding places at the bottom of the pad as needed, and then screw the screws to complete the installation.
The bathtub is elevated, so its drainage can be combined with the drainage of the washbasin or floor drain. When the drain pipe is in the drain pipe, it can be specially connected from the above position on the ground all the way to the bathtub drain, and it will be fine.
1.Do a good job of preliminary work first, clean the dust and water stains on the surface of the bathroom, and keep the bathroom dry. Spray some penetrating waterproofing agent on the leaking parts and gaps, and be sure to be even. >>>More
1. Bathroom exhaust fan size and power.
Exhaust fan is a kind of air conditioning appliance that drives the fan blade rotation by the motor to drive the airflow and make the indoor and outdoor air exchange. Also known as ventilation fan. The purpose of exhaust is to remove dirty air from the room and regulate the temperature, humidity and feel. >>>More
1.Selection of water pipe materials.
Before installing water pipes, be sure to buy high-quality, environmentally friendly water pipes. If the PP-R pipe is installed, it is better to ask a professional worker to install it. If you install it yourself, there is a high risk that the pipe will be clogged or burst, which will cause unnecessary trouble. >>>More
It should be caused by the horizontal height of the toilet close to the outdoor sewage pipe, and the sewage backflow at peak water use. If this is allowed, a sewage connection and drainage system should be built.