Spraying furniture paint is what happens when there is a crater

Updated on furniture 2024-05-27
3 answers
  1. Anonymous users2024-01-24

    Hello, what exactly do you mean by a collapse? If it is orange peel and falling off, there are many situations that will cause, such as: the surface treatment is not clean, there are stains that have not been cleaned off, the one-time coating is too thick during construction, the amount of curing agent added is not enough, and the solvent volatilizes too quickly!

    Friend, I hope mine can help you!

  2. Anonymous users2024-01-23

    The phenomenon you're talking about is the oil in the air pump.

    It is sprayed out through the air rope, and the solution is to go to the hardware tool store to buy a filter and install it on the outlet valve, and adopt it.

  3. Anonymous users2024-01-22

    There are three possibilities: 1. Your wood itself is not leveled. 2. Your primer is sprayed thick, or not polished in place.

Related questions
1 answers2024-05-27

You can add 10 percent more hardener to the paint and the paint will dry faster.

5 answers2024-05-27

There are many reasons for the cracks in the paint, and it is difficult to judge without hands-on operation. Sanding can be done with 240 and 400 water sand.

3 answers2024-05-27

How to adjust the toilet water level:

There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron, and the iron sheet in the middle of the iron is pulled upwards to be lowered, and the downward is high, and you open the upper lid of the toilet, you can see the ball connecting rod mechanism inside. There is a screw on top of it and you can see that there are screws to adjust it up, and you can meet your requirements. The water level is low, so you can save water. >>>More

1 answers2024-05-27

The color of the double-glazed balcony is due to the poor sealing of the insulating glass, which causes air leakage and water accumulation in the inner cavity of the double glass, and the mildew of the glass is caused by the high temperature and high humidity environment in summer.

4 answers2024-05-27

That should be caused by the poor sealing effect of the primer, or it is possible that too little paint is used, which is best for you to give the paint manufacturer to see, combined with the actual situation to deal with.