-
It can be adjusted, and the height can be adjusted where the float cable is pulled.
-
There should be a pontoon in the tank, which can be adjusted.
-
Adjust the pontoon. Old-fashioned bend a float pole.
Hello! First, it is important to know where the water from the toilet is going when you flush it. The lower outlet of the toilet is connected with an S-shaped pipe, which is called a trap, which always holds a certain amount of water, called a water seal, so that the odor of the sewage pipe will not come out of the toilet. >>>More
First of all, we lift the lid of the toilet, pay attention to be sure to hold it steady, handle it gently, and do not bump it. >>>More
There are screws in the water tank on the water, and there is an iron that pinched the iron in the middle of the iron and pulled the iron upwards to adjust the low, down is high, open the upper lid of the toilet, you can see the ball linkage mechanism inside. >>>More
There are two places in it that can be adjusted, there is one inlet rod, and there is also one flush valve, I don't know what kind of accessories your toilet is equipped with, I don't know the specific, but the toilet accessories are basically the same adjustable,
Open the toilet water phase cover, which is similar to the pole of the fast son, and there is a cross on it, and you can adjust the water level of the water phase by turning it left and right with a cross tape knife.