-
Anonymous users2024-01-23If you plant column reinforcement, is the bottom part of the column reinforcement inserted in the dark beam reinforcement? That is, the column reinforcement planted when the concrete of the slab is not poured. Don't just after pouring the slab, and then estimate the place of the dark beam on the floor slab, and then drill the hole and plant the reinforcement!!
Whether your column is load-bearing and structural columns are still two different things.
-
Anonymous users2024-01-22Arrange a beam in the middle of the plate to solve the problem. The thickness of the floor slab is not less than 120mm, and there are columns at both ends of the beam. If there are two floors of residential rooms on it, it needs to be calculated and formally designed, so don't toss blindly.
-
Anonymous users2024-01-21Need. Otherwise, after a long time, your floor may collapse and hit the first floor.
This is not allowed. Because once the load-bearing wall of the building is changed, its original load-bearing effect will be greatly reduced. Very dangerous.
Under normal circumstances, it cannot be affected, so the low place cannot affect the upper one. However, it is also necessary to consider the position and orientation of your unit door. There are also three floors of distance from the unit door, which all have to be considered. To put it simply, the impact is unlikely.
As for the form of compensation for demolition, it is possible to ask the other party, but the value of the compensation must match the house to be demolished. >>>More
There are a few suggestions for finding a decoration designer: >>>More
This is a typical pattern of going up the mountain and down the water in feng shui, if it is well matched with the sitting direction, you can also use the distance of 20 meters in the middle to artificially arrange the Shuangwang pattern.