-
Anonymous users2024-01-23No matter how good and firm the glue is, it is impossible to stick to the surface layer of the wall, and the skin layer will fall off if the glue does not come off. Unless this 6 cm strip of solid wood is extremely lightweight, the weight is so small that it is almost zero, and it can be omitted.
-
Anonymous users2024-01-22There is no problem with nail-free glue, but the finished line cannot be nailed at all, and the manufacturer is making it, and these problems have been considered for a long time.
-
Anonymous users2024-01-21Generally, it is fixed with nails.
Air compressor is required.
Hitting a wall with a hammer or the like can cause damage to the wall.
-
Anonymous users2024-01-20Why is the sky blue? The reason is not as stated in the common answer, because "there will be many tiny dust, water droplets, ice crystals and other substances in the air, and when sunlight passes through the air, the blue, violet, indigo and other colored light with a shorter wavelength are easily blocked by particles suspended in the air, so that the light is scattered in all directions, making the sky appear blue."
Wen Meter .180 cm. Leaving home, dying ...Retirement. Loss of wealth. 132 cm, no heirs...It's all murder >>>More
The difference between multi-layer solid wood and particle board is the amount of glue, I do not recommend both, I recommend using a double panel to make a wardrobe, that is, there is only a layer of solid wood in the middle next to the two sides of the panel, which is both economical and affordable, of course, the local tyrant can use pure solid wood. Multi-layer solid wood is actually a lot of layers of solid wood glued together, so from the perspective of the amount of glue, the fewer layers the better, which is the so-called double-sided board.
It doesn't make a difference! Don't put the bed directly under the beam!
Priority front baffle thickness,Then consider others,8Inch bass,If the unit is relatively high-end,With 4 cm of solid wood planks will not be too thick,If the unit is relatively low-end,Or the power is relatively small,It is a little too heavy and wasteful,The internal space volume of the speaker is best to refer to the parameters of the speaker unit for reasonable calculation,It is better to use the computer to simulate the design。 It is recommended to choose a solid wood board with a relatively uniform wood grain density, and do not choose a board that is easy to crack and too rough.
No, there are a few stalls to hold up.