-
Anonymous users2024-01-24It must be bad!!
I can't see the problem in a short time, but after a long time, even if you don't knock off this keel, it is possible that the ceiling will be deformed because of the problem of self-tapping nails, or the deformation of the wooden keel!
It is said that there is a keel in it.,The carpenter master should stagger the position of this keel and rearrange the downlights.。。。
Unless the carpentry master has done the "secondary keel" edge reinforcement in addition to the overall wooden keel in advance, as shown in the figure below, otherwise don't play, I hope to help you, the gift is still exchanged, if it helps, free to adopt it!
-
Anonymous users2024-01-23That's right! That wood can't be removed, it's what supports the drywall, so you need to turn it back on.
At first glance, it is not in the construction order, and the opening of the downlight hole must be completed before scraping putty. >>>More
Gypsum board ceiling downlight holes can be sawed.
Let's draw a proper circle first, you don't need to be taught how to draw this, right? Then find a 12-inch hacksaw blade, break it from the middle, insert the saw blade into the drywall, and see it along the circle. >>>More
The price varies from place to place, about 100-200 yuan, so it is recommended that you go to the physical store and ask for it.
Cracks are inevitable, the splicing is almost all cracked, and it is better to use a whole board next time. The method is as follows: mix white latex or polyethylene glue with gypsum powder, but now there are anti-cracking sales that do not need to be adjusted, and the price is relatively high. >>>More
You first need to know the size of the opening of the downlight, and then you can use two ordinary nails to nail it to the wooden strip, and the distance between the two nails is half the size of the opening; Then determine the center of the hole, drive a nail into the center, and then make a circle back and forth like a compass so that the plasterboard can be broken - at this point, a hole in the downlight is opened. >>>More