The toilet rack pressed the water, why did Ding Ding have it, and it wouldn t bounce up when it was

Updated on Toilet 2024-05-29
2 answers
  1. Anonymous users2024-01-24

    If it's broken, it's better to fix it, otherwise it will leak.

  2. Anonymous users2024-01-23

    The spring is broken.

    Buy one for 10 bucks in exchange.

Related questions
3 answers2024-05-29

That's a disinfectant cleaning solution in it.

This stuff is sold in supermarkets. >>>More

5 answers2024-05-29

It is infused with a powdery substance called sea blue.

The role is mainly disinfection and visual needs. >>>More

4 answers2024-05-29

The bottom of the toilet will store water because the bottom of the toilet is made into a U-shaped with the sewage pipe, which can isolate the air from the sewage tank from coming out of the toilet through the sewage pipe. Therefore, the sewage pipe will not store water is unqualified. >>>More

5 answers2024-05-29

There is a reverse bend inside the toilet, which has a long-term storage of water to seal the outlet, which is used to block the odor in the sewer pipe, some toilets have original design, the water in the toilet must be higher than the height of the outlet of the back bend before the water will flow away, the method of measuring the height of the back bend is to slowly put water into the toilet, when the water surface is no longer tall, the height of the water surface is the height of the water outlet, if the water discharge speed is accelerated, the inertia generated by the water flow will cause the pipe to produce negative pressure, suck away the water in the toilet, the higher the speed, the more it will be sucked. Now the toilet tank is integrated with the toilet, and the water velocity is certain, the water flow speed can not be increased by increasing the height of the water tank, and the water tank can only be increased by increasing the height of the water supply level valve in the water tank, and the solution can be installed by tilting the toilet back a little, and the height of the outlet of the anti-bend can be reduced to solve the problem of too high water in the toilet, but do not tilt too much, it is not beautiful to be too large, it is inconvenient to use, and there is that it will be invalid after being lower than the height of the anti-water elixir, and the smell will come out.

8 answers2024-05-29

Everyone has used the toilet, have you noticed the two buttons of different sizes on the toilet! Many people may think that the big button represents a lot of water output; The small one is the small amount of water output. After listening to the words of the decorator, I knew the purpose of these two flush buttons on the toilet. >>>More