How to control the water heater installed on the balcony?

Installed on the balcony is the best. The hot water of the water heater can be adjusted to a large enough size, with one sanitary indirect hot and cold water supply pipe, and finally the water temperature can be adjusted by yourself with the hot and cold water faucet. If it is a strong exhaust water heater and has a smoke exhaust pipe connected to the window, it can also be installed in the bathroom, but be careful not to take a bath for too long.

Hehe, it's a gas water heater, right? The gas water heater is installed on the balcony with ventilation in mind to avoid exhaust gas poisoning accidents; It can also be installed indoors on any other side, but it must be installed with a forced exhaust air duct to exhaust the combustion exhaust gas to the outside.

1. Water volume adjustment switch: when the fire power adjustment switch is constant, because the flame remains unchanged, the rated energy burned out is unchanged, so when the water volume is adjusted, the heat generated by gas combustion is certain, and the energy obtained by the water heated per unit time becomes more, so that the water temperature rises; On the other hand, when the water volume adjustment switch is increased, the heat generated by gas combustion is constant, and the energy obtained by heating water per unit time becomes less, so that the water temperature is reduced.

2. Fire adjustment switch: When the water volume adjustment switch is constant, because the amount of water through the water heater per unit time is certain, when the fire adjustment switch is adjusted, the water temperature increases with the increase of the fire power, and the fire power decreases when the fire power is adjusted. Winter and summer switches:

When the water volume adjustment switch and the fire control switch are constant, when the switch is adjusted to the winter switch, the combustion nozzle is opened, the gas consumed is more, the heat generated increases, and the temperature of the hot water released increases.

The gas water heater must be ignited to reach a certain water temperature adjustment switch in order to workSome old-fashioned water heaters can only open the water heater normally when the water volume adjustment switch is adjusted to a certain level: the reason is that the water-gas linkage device in the water heater needs the water pressure to reach a certain pressure before the tympanic membrane can be pushed open normally, so as to open the water heater. This is related to the water pressure of the environment, and you can also choose a gas water heater with low pressure starting.

I don't know, my air conditioner and water heater are installed on the balcony, and the machine is debugged when it is installed, and it doesn't need to be regulated when taking a bath, which is quite comfortable.

As long as it is installed properly, it will not burn other combustibles.

Installed on the living balcony, attention should be paid to keeping the living balcony well ventilated during the use of the water heater to ensure that the water heater has enough oxygen to use, and can also avoid excessive accumulation of harmful gases generated when the water heater is used.

Installed on the balcony is the best. But be careful not to take a shower for too long.

Installed on the balcony is the best. The hot water of the water heater can be adjusted to a large enough size, and the number of pure disturbance sanitation indirect hot and cold water supply pipes and pants are each one, and finally the water temperature can be adjusted by yourself with the hot and cold water faucet. If it is a strong exhaust water heater and has a smoke exhaust pipe connected to the window, it can also be installed in the bath potato room, but pay attention not to take a bath for too long.

I don't know, my family's air conditioner and hot water envy device is installed on the balcony, the machine is debugged when it is installed, and it doesn't need to be regulated when taking a bath.