-
Anonymous users2024-01-23As long as it is connected, there is no damage and pollution. For example, the use of structural adhesive connection, although there is no damage to the wall, but after demolition, there will be structural adhesive bonded to the wall. If this is allowed, use structural adhesive for bonding. I hope my answer can help you.
-
Anonymous users2024-01-22Stick a hook on the mirror and pull a wire light to hang on the hook!
-
Anonymous users2024-01-21Use double-sided tape to glue the trunking to lead the thread.
From the perspective of efficacy, it is not necessary, but it seems to be more accustomed to having a ceiling light visually.
Buy a double-open single-control switch to control the lights and exhaust fans. >>>More
The lighting is controlled by the door switch, the line is in the appropriate position on the top, and then from the top light lead to the mirror (generally meter high), the mirror front lamp is controlled by the nearest switch or the same top light switch. It should also be heated and exhaust equipment, not as simple as two wires. Again.
The installation position of lighting is set according to the middle position of the color light of the whole space, not the partial color light, so it is generally installed in the middle of the space, and it is also possible to install a single local (explosion-proof lamp) type.
I insert it with a flathead screwdriver from the side plating lampshade and pry it down, and there is a pressure spring.