-
Anonymous users2024-01-24See if the water inlet switch below has been turned off by your child.
-
Anonymous users2024-01-23There's a water inlet switch down there, the one that goes up and down, and you see if it's turned off.
-
Anonymous users2024-01-22Just take a picture, that's what the water tank in our dorm does.
-
Anonymous users2024-01-21Open the water tank, is the plastic floating in the water stuck?
-
Anonymous users2024-01-20The sudden failure of the flush toilet is mostly due to the blockage of the filter screen, because of long-term use, the filter screen is easily blocked by stains such as scale, so that tap water cannot come in γAt this time, just rinse the strainer clean, and remember to close the valve of the hose connecting the water inlet into the tank first, otherwise the water will make the ground all over the place.
Secondly, you should also prepare some repair tools, such as wrenches, screwdrivers, needle-nose pliers, etc., remove the hose and water tank water replenisher with a wrench, and replace it with a new water replenisher.
When the water dispenser is taken down, there is a small square column in the middle of the pipe, and then pull it out with needle-nose pliers, and then the small square column and the strainer come out together. When cleaning the filter, you can soak it in water with a limescale detergent for a while, and it will be particularly clean. You can also pour some cleaning agent into the water refiller, the scale can be easily removed, and then install it back after washing.
Common toilet faults and how to deal with them
1. The toilet is leaking.
Toilet leakage is the most common problem, mainly caused by aging and damage to toilet tank accessories caused by being used for too long. If this is the case, just replace the corresponding accessories.
2. The toilet is clogged.
Clogged toilets are mainly caused by insufficient flushing force, and secondly, it is also possible that the toilet is clogged with stains. If the toilet is blocked by soft objects, this method is easier to solve, as long as you use some dredging tools can easily solve, if it is blocked by hard objects, you may have to disassemble the toilet.
There are several reasons why the toilet does not get water: >>>More
Is the valve open?γγ Is this a new set of drifters??? Press the float on the left to see if it will get into the water, whether the float is too low.
If the toilet does not enter the water, it may be that the pipe is blocked or the inlet valve is broken, so you can repair it yourself or find a property to repair it.
If you want to repair it, try to disassemble it, generally the mouth is blocked, and the eye is relatively small and easy to block.
Water outage is often a water pipe repair project, by the repair of the vibration of many pipe wall rust will fall off and block your water pipe, because the toilet outlet is smaller, easier to block, you can unload the connecting water pipe, put water to flush off the debris, you can't ask a professional to deal with it.