-
Anonymous users2024-01-24Hello, the toilet waterproofing is not done, if there is no brick can be continued, if the brick is pasted, you can open the floor brick and redo the ground waterproofing.
-
Anonymous users2024-01-23Toilet waterproofing is mainly based on grooming, supplemented by waterproofing. This waterproof layer can generally play a certain role, the main role is that you stick the brick to paste well, find a good flooding, and then do a good job of the brick joint, no water accumulation is no problem.
This situation is also more common, as long as there is no tile on the better to deal with, the bathroom after waterproofing 24 hours after the closed water test, the water depth of 2 to 3 cm, the closed water time is not less than 24 hours, the reason for the closed water test is to check where there is no treatment in place, if there is, for this position local repair on the line, but be sure to pay attention to your situation, repair 24 hours after the closed water test must be carried out again, and then paste the tile! >>>More
First of all, during construction, there may not be a special plugging work for the leakage point, and the bricks are directly laid, so the water leakage problem cannot be fundamentally solved. >>>More
Painting on the outside doesn't do anything! The key is that the indoor waterproofing is not done well, it is recommended to remove the tiles and redo the waterproofing, and solve it completely!
Hello, it is recommended to do a closed water test first, and if there is a water leak, you need to do a new waterproof!
If the house is to be sold but the toilet waterproofing is not done well, although there is no impact, it must be made clear when selling, it has affected the future. Thing.