-
If it is a problem with the quality of the house, you need to contact the developer to find a professional company for appraisal and be responsible for maintenance, aftermath or compensation.
Find a decoration company to check it, if it is a crack in the base layer, it is necessary to see whether it is accompanied by hollow drums, the size of the area, if the area is larger, the place should be chiseled off, and smeared with cement mortar in several layers, after drying, paste fiberglass cloth or high-elastic fiber paper tape in the place, the area should be larger than the chiseled area, and then scrape the putty and paint it. If it's just surface cracking, just shovel off the putty, stick fiberglass cloth or high-elastic fiber paper tape, then scrape the putty and paint it. Chenguang nano silver high-efficiency antibacterial interior wall latex paint is healthy and environmentally friendly, dirt-resistant and weather-resistant, and of excellent quality. >>>More
There are two types of cracks in the house, one is a slight crack in the non-structural layer. The structural layer is the stressed floor and wall, and the non-structural layer is the coating, waterproof layer and decorative layer. >>>More
Reasons for ceiling cracking: 1. The flatness of the top and wall is not enough, when we fix the keel upward, it is more energetic, so let the oiler first carry out gypsum leveling on the wall on the spot, first find out the flatness of the wall and the top surface, and then hit the keel after leveling, which can effectively reduce the cracking of the ceiling; 2.The keel used is a wooden keel, which will be deformed with the change of temperature and humidity, and once the wooden keel is deformed, the thin gypsum board outside will also crack; 3. >>>More
There are two types of cracks in the house, one is a slight crack in the non-structural layer. The structural layer is the stressed floor and wall, and the non-structural layer is the coating, waterproof layer and decorative layer. >>>More
There are several possible causes. For example, the quality of the tiles, not sufficiently soaked before installation, too small a gap during installation, etc.