If you look at the drainage pipe of the bathroom on the second floor, do you have to look at the dra

Updated on Bathroom 2024-05-01
2 answers
  1. Anonymous users2024-01-23

    The drainage pipe of the bathroom on the second floor, to find the direction and the location of the sanitary equipment, you should look at the floor plan of the second floor; To find the height should look at the system diagram, there is an elevation on it, and only then can you know the size of the connection.

    The drainage pipes on the ground floor should be discharged separately from the outside, and the drainage pipes of the toilets on the second floor have nothing to do with the ground floor plan (first floor).

  2. Anonymous users2024-01-22

    Look at the second-layer drawings and look at the system diagram.

Related questions
1 answers2024-05-01

It can only be repaired, and there is no other way to say. Find a property or developer, hurry up and find it, once you relax, the upfront property time expires, and you have to spend your own money.

1 answers2024-05-01

1 Make a hole in the floor slab.

2. Before the installation of the drainage pipeline, the civil engineering negotiation shall be required to pay off, find the size of the dump of sanitary appliances and the height of the rejection, install the trunk pipe, the riser pipe to the branch pipe in turn, and verify whether the coordinates are accurate again before the civil engineering plugging the floor hole. >>>More

1 answers2024-05-01

Code for Design of Building Water Supply and Drainage, GB50015-2003 (2009 Edition). >>>More

2 answers2024-05-01

Bathroom copy main pipe leakage this.

Whoever is responsible for the attack must first confirm what is the cause of the water leakage in the main pipeline. If it is because of the water leakage caused by the decoration, it is the responsibility of the decoration company, if it is not caused by the decoration company, it is the responsibility of the property. >>>More

4 answers2024-05-01

The question is not very clear, the main pipeline is like a tee, the plug has a cap, this is the inspection port, used for maintenance, and your daily use has nothing to do with it. When decorating, a door should be left in this position for maintenance, at least the location of the inspection mouth should be marked, because this thing is generally not used, and the decoration part will be destroyed in special circumstances, and it is easy to destroy and repair.