How to remove the kitchen sliding door?

FIRST REMOVE THE FIXING NUT ON THE SIDE OF THE DOOR, THEN LIFT THE DOOR LOCK DIRECTION, LIFT UP ABOUT 3CM TO LET THE PULLEY OFF THE TRACK, AND THEN TILT. Use other tools to pick the fixed screw of the slide rail.

The hanging sliding door is a kind of door that uses the upper crane wheel to support the sliding, which has no noise and no threshold when the door is opened, which is beautiful and generous.

The sliding door is made of various materials, including all-wood doors, all-glass doors, wooden frames and glass combinations, etc., and can also be customized according to the decoration style.

Sliding doors are suitable for balconies, dining rooms, kitchens, sanitary partitions, etc.

How to install the aluminum alloy hanging sliding door:

Determine the size of the door opening to determine the size of the door opening to be installed area, the width of the general area should be less than the height of the door opening 2 cm is the best, the door opening is too wide will cause the width of the door opening to be disproportionate to the height, affecting the overall aesthetics and practicality of the door.

Prepare the sliding door in advance to ensure that the products and parts are intact, and also prepare the screwdriver, foam glue, triangular wedge and electric drill, and the preliminary preparation should be complete.

Fix the aluminum alloy hanging sliding door Put the aluminum alloy hanging sliding door prepared in advance into the door opening, use the triangular wedge to fix the door, use the horizontal adjuster for vertical detection, and correctly splice the frame and the horizontal frame with half a screw to reinforce.

Formal installation Use an electric drill to punch and locate at a position of 40 cm near the door frame, install the fixing bolt after the hole is completed, pay attention to the flatness of the edge of the door frame, use an aluminum alloy ruler to check, tighten the bolt after confirmation, and use foam glue to plug the gap in the extension of the door frame after installation, and you can directly install the door and window after completion.