-
Anonymous users2024-01-23Master Bang home doctor summarized what is the cause of toilet leakage:
1.The material is inferior.
In today's chaotic market, many manufacturers will choose inferior materials to produce in order to reduce production costs, resulting in a shortened service life of products, resulting in cracking of water inlet valves, drain valves, etc.
2.Excessive pursuit of miniaturization of toilet tank fittings.
When the water submerges the float, the inlet valve fails to close, so that the water keeps flowing into the tank, and finally flows into the toilet from the overflow pipe to cause water leakage.
3.Poor design.
When the toilet is not designed, the mechanisms of the tank accessories interfere during operation, resulting in water leakage. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage.
4.The differential pressure inlet valve is not filtered.
In this case, the impurities in the water can easily block the small hole of the sealing ring of the toilet tank, resulting in the inlet valve cannot be closed and the seal fails.
5.The drain valve seal, the bonnet and the valve body seal surface are not tightly fitted.
Between the two is wired contact sealing and surface contact 2 situations, generally speaking, most of them are sealed with wire contact, and this needs to use the traditional flap sealing bonnet, if the quality of the flap sealing bonnet is not good, resulting in errors in use, it will also make the toilet leak.
I've seen the news! Someone in Taiwan invented it, which can raise fish, with an aerator, and is a transparent toilet tank! It has already been listed, but unfortunately in Taiwan, the mainland may not have it.
General high-end mahogany furniture brand furniture are mortise and tenon structure, such a well-known brand as Hongmu impression is more, the process is also considered superior in the mahogany furniture industry, pure hand-carved Xun posture carving and production, after drying, acres with absolutely open materials, carpentry, carving, grinding, lacquering and other more than 50 production processes to produce a piece of furniture.
The damage to the pressed internals cannot be repaired, and it is best to replace it with a new one.
Flush toilet is broken, in general, they are looking for the toilet after-sales personnel to come to repair, before they come, they can observe the flow of water in the tank, the float or float rod is not aligned in the right direction. Carefully bend the float bar to move the float so that it does not rub against the side walls of the tank. Here are some ways to refer to the following. >>>More
Your question is very vague, I don't know which part you are talking about, the situation of the overflow of the water tank is that there is a problem with the float valve, and it can not be closed normally when it reaches a certain water level, and the water leakage in other places should be a problem with the mat at the connection, and it can be replaced in time.