-
Anonymous users2024-01-23A e68a8462616964757a686964616f31333433643633, before choosing a toilet on the market, first determine the size of the water in the seat (i.e. the distance from the wall to the wall). Before installation, please make sure that the product accessories you choose, completed, please carefully review this manual and learn about some products.
2. Determine the height of the drain according to the condition of the toilet and cut off the rest of the part. The goal is to make the plumbing and toilet bottom more consistent. Start by using a hacksaw or cornea for the sewer according to the horizontal height of the centimeter, because the flange of the toilet bowl is soft.
If it is not centimeters high, there may be water seepage problems, and centimeters are more tightly fitted.
3. Measure the pit distance. Before choosing a toilet, first determine the size of the water inside the house, that is, the distance from the wall to the water. When using a toilet, if you want to decorate the tiles, you must measure the pit distance after applying the tiles. Otherwise, the toilet will be bought back and cannot be installed.
4. Install the flange ring provided with the toilet at the drain. Remember to press hard to ensure the compaction of the flange ring and toilet drain. Place the flange on the toilet drain.
Then carefully align the lower hose and lower it smoothly. At this point, the wall of the sewer pipe is inserted into the viscous clay of the flange for sealing.
5. After the water test is completed, start to install the cover.
6. Glue around the toilet, this step is also very important, not only to stabilize the toilet, but also to prevent the smell of the net from being released from the toilet. Therefore, we will not only fight, but also four whole weeks. At the intersection of the toilet bowl and the outer surface of the floor, since the toilet bowl and the floor are not one, a joint seal transparent sealant can be used for agitation, and the outer opening of the toilet bowl is sealed to maintain the integrity of the floor.
Some bathroom water can clog around the toilet bowl. NOTE: IF YOU NEED TO INSTALL THE SET SCREWS, FIRST APPLY A SPECIAL SEALANT INSTALLED IN THE TOILET BOWL EVENLY ON THE OUTSIDE 2CM OF THE TOILET BASE.
The drain of the toilet bowl should be pulled towards the center of the drain. Expansion bolts are located on the left and right sides of the toilet, remove the toilet, punch holes and raised bolts.
7. Install or debug the water tank accessories.
8. After installing the toilet, wait until the glass glue (putty) or cement mortar has solidified before releasing water. The curing time is usually 24 hours.
The inlet valve in the Geberit tank can eliminate the noise caused by sudden increases and pressure fluctuations, and the soundproof mats of the toilet and the wall can also block the noise well. It is a Swiss brand, and every detail is taken care of.
It is necessary to bury the matching special embedded parts on the partition wall first, and install the toilet on the wall through the bolts on the embedded parts.
What is a wall-hung toilet.
Wall-hung toilet as the name suggests is a toilet hanging on the wall, wall-mounted toilet originated in developed countries in Europe, it is mainly a relatively concealed water tank combination, the country is in recent years and gradually popular, wall-hung toilet because of its appearance fashionable space-saving and other characteristics are widely used in high-end real estate, often seen in the metropolis. >>>More
The wall-hung toilet can effectively store space, save space, and make the bathroom look more open, which is very suitable for small bathroom places. Generally speaking, the size of the wall-hung toilet that is more common in the household will choose 220mm pit distance. >>>More
Wall-mounted toilet price Wall-hung toilets belong to the modern era. >>>More