What to do if there is water in the bathroom, waterproofing measures in the bathroom

How to deal with stagnant water in the bathroom:

1. Before decoration, carefully check whether there is leakage in the kitchen and bathroom on the upper floor, if there is, you should first do the waterproof project upstairs before decoration. If there are no occupants on the upper floor for the time being or for other reasons, the waterproofing works on the upper floor cannot be treated for a while, measures should be taken to remedy the situation: apply polyurethane to the bottom of the leaking part, but the plastering layer of the leaking part should be disposed of and the base layer should be dried. >>>More

The sewer pipe of the bathtub is aging and cracked, resulting in water leakage, and there is a crack in the floor tile of the bathroom, resulting in water seepage in, but the general cracking and water seepage will not be very serious, it is recommended to eliminate them one by one, you can check whether the sewer pipe is cracked first. It can be tested with a small amount of water. >>>More

Radical treatment method: chisel the old "floor drain and sewer pipe between the upper mouth and the floor slab", connect the interface between the floor drain and the sewer pipe, and then use 1:1 cement mortar and 15% of the cement content of the alum stone expansion agent to make up, you can. >>>More

Start by determining whether the pipe is leaking or the leak is caused by a failed waterproofing layer. >>>More

First, the waterproofing was not done well at that time, and many owners asked the plasterer to do it when decorating, which led to a lot of negligence and inadequate details when decorating. >>>More