-
Anonymous users2024-01-231.Be sure to do wall waterproofing. Before laying wall tiles, do a good job of wall waterproofing. Generally, the wall should be waterproof with a height of 30 cm, but for non-load-bearing light walls, the whole wall should be waterproofed, at least 60 cm high.
2.The joints between the wall and the ground and the joints of the pipes between the water and the water are the most problem-prone places, and the workers must be urged to deal with these edges and corners, and the waterproof coating must be applied in place.
3.Resurfacing floor tiles should be done to waterproof the floor. If you need to replace the original floor tiles in the bathroom, after chiseling off the original floor tiles, you must first level the ground with cement mortar, and then do waterproof treatment, so as to avoid leakage caused by uneven thickness of waterproof coating.
Be sure to clean the ground before doing waterproofing. Wolf Warrior Waterproof Master.
: First check that part (to.
Downstairs looks at that place) leaks. >>>More
You should be describing the situation of water seepage in the bathroom and the bathroom partition room, so you need to find the cause of the water seepage first >>>More
Bathroom leakage first to find where the leakage, and then find a professional organization to see the division of responsibility, whether it belongs to the decoration company did not do its job properly, or caused by human reasons. Finally, find a professional to fill in the gaps. >>>More
If the upstairs cannot be coordinated, it is necessary to make the square ceiling into a funnel type to drain the dirty water to the sewer, and the whole fan to exhaust the odor to the outside.
Leaking water in the bathroom, leaking or leaking downstairs is a troublesome thing in life, which makes many people very annoyed. Now I would like to introduce to you the experience I have accumulated over the years, so that you can easily judge how to deal with it. >>>More