Why should the top of the sliding door of the shower room be left empty for 30CM?

The top of the sliding door of the shower room should be left empty for 30CM, its main purpose is to separate dry and wet, generally not to do the top, on the other hand, also considering the problem of ventilation, the air above can be circulated to ensure the safety of bathing. The only downside is that there may be steam running out.

Maybe the landlord is afraid that he is not warm, right, leaving 30CM will not have much impact, safety first, since they are all left to, there must be a useful place for it.

1。You choose a simple shower room, also known as a shower screen, its main purpose is to separate moisture; Therefore, it is generally not done at the top, so there is the phenomenon of steam running out as you said.

2。If you want to avoid this problem, the workaround is to use a steam room.

It's strange that you don't suffocate in the bath, don't take it for granted.

It's all 30CM, even if you don't keep it, the mirror outside you will get wet.

Does the landlord mean that the ventilation fan is installed in the shower room?

It is estimated that no matter how powerful the exhaust fan is, it can't withstand such humid and high-temperature water vapor. . .

Well, this is indeed for security reasons, and it's all true.

The technology is not good, the top is not good-looking, and the decoration people do not have better materials to cap, so find some reasons to say that it is not good to do the top is not good-looking.

Shower screen, shower room: separate shower cubicle, modern home has higher and higher requirements for bathroom facilities, many families want to have an independent bathing space, but due to the limited sanitary space in the room, only the bathing facilities and sanitary ware can be placed in one room. The shower room makes full use of the indoor corner, and uses a fence to clearly divide the shower range to form a relatively independent bathing space.

The door top comprises a base plate (1) with an L-shaped cross-section and a groove plate (3) with a longitudinal slot hole (2) and is installed parallel to the outside of the long arm of the bottom plate (1), a ball device is fixedly connected to the lower end of the groove plate (3), and at least two screw rods (7) perpendicular to the plane of the bottom plate and a nut (8) matched with the screw rod are arranged on the long arm of the bottom plate.