What should I do if the toilet does not go to water

In fact, it is also simple, and the situation of less water from the faucet is a problem. Even the better toilet bowl has a filter inside, and the filter is blocked by too much limescale for a long time, so that the tap water cannot come in. As long as you can remove the filter and clean it, you can do it.

Close the valve on the hose that connects the water inlet to the tank, or the operation will spray water after a while. Flush the toilet again and drain the remaining water from the tank.

Along the water inlet hose, look at the bottom of the toilet, there is a hexagonal nut to connect the hose and the water refiller in the water tank (a standing plastic pipe) together, turn the nut with a wrench, and then look up along the position of the nut, there may be a nut in the same position, the same turnable, the same function of the rising, also unscrewed, my family is plastic, I don't know what else is the same as this. After two processes, the water replenisher can be removed from the inside of the toilet.

Take off the water replenisher, see that there is a small square column in the middle of the inner tube, and pull it out with needle-nose pliers, you can see that the square column and the filter screen are one, and they come out together.

Use a waste toothbrush or something to clean the filter. It's better to have a scale cleaner, no and it's not a big problem, I just use the scale remover to soak the filter for a while, it is very clean, you can also pour some of this mixture into the water filler, you can also remove the scale inside. All cleaned.

Finally, it can be installed back as it is.

It should be that the water parts are broken, just buy a set of water parts and replace them. Don't buy inferior water parts, try to buy better ones.

Answer pro, hello, I am happy to answer for you, please wait a moment, immediately answer for you dear, when the toilet does not have the problem of water, we have to see if the water is off in your home or someone has turned off the water inlet valve, if this is the case, then no water must not be on the water, this you have to pay attention to the owners to see when the water comes or open the water inlet valve yourself. Of course, this rarely happens, but we can't rule it out, and we still have to check it.

After the previous situation of no water is ruled out, we can give priority to the problem of the water tank, we open the lid of the water tank, check the filter screen of the water tank, the toilet tank will be practical for a long time, and the water rust filter will be blocked, resulting in the water tank not watering, we can remove the filter first, let the water first, after flushing the toilet, we are cleaning the filter screen, and install it after cleaning. In this area, I need to remind everyone to close the water inlet valve, otherwise it will cause the water to run and you may get yourself wet.

What to do if the toilet does not go to water.