The furniture is white and silver open paint, what color should be used for the decoration?

To do the rubbing process, first of all, the board must have obvious textures, such as ash, oak, etc.

Step 1: Polishing the plate, because there are burrs or other pencil marks on the plate. The sanding must follow the grain of the wood.

Step 2: Brush the sealing primer. The sealing primer can effectively enhance the hardness of the paint film and enhance the adhesion between the paint film and the plate.

Step 3: Polishing. For about 3 hours, polish the sealing primer to a 45-degree angle to see no reflection.

Step 4: Spray white paint. The key point is that the spraying must be thin, not to block the pores, experienced painters, there is no problem with this.

The paint here must be sprayed, not brushed, and it is easy to clog pores. The standard practice of spraying paint is to apply a white primer twice to a white topcoat, which can be applied according to the specific situation, or directly 2-3 times of topcoat.

Step 5: Wipe the water-based silver Grace Rub (or gold rub). Oily Grace can also be used, compared to Oily Grace, which is more convenient to use, a little more controllable, and the white paint surface is easier to sand.

Step 6: Polishing. It should be noted here that the polishing needs to be gently sanded with 600 mesh dry sandpaper, and the white color of the surface is polished off by the dyed part, and the remaining white paint texture is gold or silver.

Step 7: Spray white paint with special glossy oil. The function of the varnish is to effectively protect the white paint, prolong the service life and yellowing resistance time of the white paint, and also have the following functions:

Non-yellowing, scratch and stain resistant. Do not use polyester paint clear paint as a cover paint to protect the white paint, because the polyester clear paint is sprayed on the white paint, and the white paint is easy to yellow.