What to do if the toilet tank doesn t get water

You can first check whether the water source is normal, if the water source is normal, then you need to check whether there is a problem inside and outside the water tank. If none of the above methods solve the problem, then you need to seek professional help. In order to avoid this problem, you can take some precautions, clean the tank regularly, pay attention to the quality of the water source, and regularly check the connection between the inside and outside of the tank.

The toilet tank not getting water can be caused by the following reasons:1Tank switch failure:

The water tank switch may be damaged, resulting in the water tank not being able to be watered. 2.The water pressure is too low:

If the water pressure is too low, it may cause the tank to fail to fill the water. 3.Clogged tank inlet valve:

The tank inlet valve may be clogged, causing the tank to not be able to fill the water. 4.Lack of water in the tank:

There may be a lack of water in the tank, causing the tank to not be able to fill the tank. 5.The faucet is not on:

A faucet not opening may also cause the tank to fail to fill with water. If you don't know what caused the water tank to not water, it is recommended to ask a professional plumber to check it.

The toilet tank not getting water can be caused by the following bright shots:

1.Tank switch failure: The tank switch may be damaged, causing the tank to fail to fill the water.

2.Water pressure is too low: If the water pressure is too low, it may cause the tank to fail to fill the water.

3.Clogged tank inlet valve: The tank inlet valve may be blocked, causing the tank to fail to fill the water.

4.Lack of water in the tank: There may be a lack of water in the tank, resulting in the tank not being able to fill the tank.

5.Faucet not opening: A faucet not turning on can also cause the tank to not be able to fill the water.

If you don't know what caused the water tank to not be watered, it is recommended to ask a professional plumber to check it.

The most important thing in the bathroom is the flush toilet, sometimes we will encounter the problem of the flush toilet not running water after moving into the new house for a period of time, what should we do at this time? Please see the tutorial in this article.

01 First of all, check whether the valve (angle valve) switch of the tap water at home is open;

02 If it is open, then check the flush switch: first check whether the flush switch has elasticity and whether it rebounds when pressed, if not, it means that the spring inside the button is rusty, at this time, you can replace the button, or if it is not too troublesome, it is okay to press it several times each time you use it to reset.

03 If the water pressure is too low, it will be difficult to get into the water. The low water pressure may be caused by the high floor of the house or the overall water pressure of the community, or it may be caused by the water pressure being too low due to the water valve being opened too small.

04 Open the water tank cover to check whether the triangle valve is blocked, if the triangle valve is blocked, the toilet can not be watered, you can disassemble the triangle valve to see if the connection with the inner wire is blocked, and see if the valve core is open and closed normally.

05 After the toilet is used, the toilet does not go to water, which is generally a blockage problem, at this time, you can use some tools such as waste toothbrushes to clean water parts and filters, of course, with limescale cleaner, the cleaning effect will be better. You can also add some scale remover to the water filler to remove the scale, which is less likely to clog.

06 You can solve the problem of the toilet bowl not being watered by adjusting the height of the pontoon, if the toilet tank cover will be pushed to the inlet valve, you need to adjust the orientation of the inlet valve until the float or float of the inlet valve moves freely, if the floating bucket is stuck, the water generally cannot enter.

If you really can't fix it, it is recommended to seek professional help!

The solution to the toilet tank not watering is as follows: 1. Close the angle valve first, remove the angle valve with a tool, and check whether the angle valve is rusty or scaled.

2. After the angle valve is disassembled, replace it with a new angle valve, and there is a filter screen under the toilet tank, remove the filter screen, and then rinse it with clean water.

When buying a flush toilet, you should pay attention to the appearance gloss of the flush toilet, generally the higher the gloss, the better the quality, and the longer the service life.

All you need to do is remove the filter and clean it. Close the valve on the hose that connects to the water inlet of the water tank, or the operation will spray water after a while. Flush the toilet again and drain the remaining water from the tank.

When the water tank does not go up, you can open the water tank to check and observe whether the piston can be plugged, because if the piston is broken, the water in the tank will flow out, and the switch will not reach.

Hello dear, I'm glad to answer for you, please wait a moment, and answer for you immediately.

Dear, when the toilet does not have the problem of water, we have to first see if the water in your home is off or someone has turned off the inlet valve, if this is the case, then there is no water must not be on the water, this you have to pay attention to the owner group to see when the water comes or open the inlet valve yourself. Of course, this rarely happens, but we can't rule it out, and we still have to check it. After the previous situation of no water is ruled out, we can give priority to the problem of the water tank, we open the lid of the water tank, check the filter screen of the water tank, the toilet tank will be practical for a long time, and the water rust filter will be blocked, resulting in the water tank not watering, we can remove the filter first, let the water first, after flushing the toilet, we are cleaning the filter screen, and install it after cleaning.

What to do if you don't get water from the water tank, you can first check whether the water pipe is open, if it is really not watery, then you can only find a repairman to repair it.

There are three ways to do this:

1.Find the phone number of the repair company, press the number, and leave the address.

2.Open the lid of the water tank and use a tool such as a washbasin to assist.

3.Go to a public toilet.

The inlet valve is broken.

Just unscrew it and replace it with another one.

There are places that sell water tank accessories.

Not too many models.

What to do if the toilet does not go to water.

1. First close the water inlet valve of the toilet, drain the remaining water in the tank, and then use a tool wrench to unscrew the hexagon nut under the toilet, and then you can take out the water replenisher and replace it with a new one. 2. If the water filler is broken, it will also affect the water on the toilet, after removing the water filler, you can also use needle-nose pliers to remove the filter screen, use a soft-bristled toothbrush to gently wipe the dirt on the filter screen, and finally install the water filler and filter back according to the steps. 3. If the various parts of the toilet are aging, such as the flush button is not elastic, and the spring is rusty for a long time, it is good to replace it in time.

Precautions for use: 1. It is forbidden to pour cement, lime, paint and other sewage into the flush toilet, so as to avoid the sediment of sewage precipitating and agglomerating in the flush toilet, which is easy to block the air return hole for a long time. The water discharged from the flush toilet does not form a vortex and reduces the impact force.

2. When the toilet is dredged and no foreign body is found to be blocked, it should be considered to check whether the air return hole is normal. If a blockage is found, as long as the dirt and impurities in the air return hole are removed, the flush toilet will immediately return to normal. 3. Some people in the family often pull sheep feces, and it is easy to block the air return hole due to the small size of the fecal particles.

The flush toilet return hole should be checked frequently for blockages, and the blockage in the return air hole should be removed frequently.

The toilet is an indispensable device in our home and brings many conveniences to our daily life, but after a long period of use, there will be problems and people are overwhelmed. So what to do if the toilet tank doesn't water? What should I pay attention to when using the toilet?

First of all, see if it is caused by loose or rusty spring of the water tank button, if so, replace the water tank button; Secondly, see if the water pressure is not enough, if so, you can add an additional pump, or avoid the use of the peak period of cautious closure or spare some water next to it; Finally, check whether the water tank inlet valve is blocked, if there is a blockage, just clean and dredge.

What to pay attention to when using the toilet:

1. First of all, the toilet bowl should not be placed in a place where the sun can shine, and it should not be too close to the heat source or oil smoke, otherwise it will cause the toilet to change color. At the same time, the surface of the toilet bowl should not collide with hard or heavy objects, otherwise it will cause scratches or cracks on the surface of the toilet bowl.

2. Secondly, you should pay attention to the cleaning of the toilet bowl, and you can use a soft cloth to clean the lid and seat of the toilet, but you can not use a strong acid and alkali detergent, otherwise it will cause the surface of the toilet to be corroded. Moreover, if the cover plate is installed in a place without a water tank, people cannot lean back when using it, and the cover plate will be broken. At the same time, when opening and closing the cover, the spine filial piety should be light to avoid collision with the water tank and cause breakage.

3. Finally, when the toilet is in use, the contact surface between the base and the ground should be sealed with glass glue, and if the metal seat hinge is used, it is necessary to avoid acid and alkali solvents adhering to it, otherwise it is easy to rust. In addition, in normal use, do not throw newsprint, urine pads, sanitary napkins and other items into the toilet to avoid clogging. If you accidentally fall into it, you can use skin inhalation to remove the debris.

Summary: The above is the relevant content of what to do if the toilet tank is not watered and what to pay attention to when using the toilet, I hope to help friends in need.

1. If it is the reason for the faucet, the faucet is slow to produce water, you can clean the filter screen of the toilet filling part, because after a long time of use, there is a lot of dirt accumulated on the filter screen, which will cause the water to be very slow.

2. The toilet is not on the water and the water is slow, try to change a water replenisher, the replacement of the water replenisher is also relatively simple, you can use a hose to connect directly to the bottom of the toilet, and then use a wrench to unscrew the nut to replace the water replenisher.

3. The speed of water filling can be accelerated by cleaning the toilet pipe. Once the dirt is removed, the water will be served quickly. Make it a habit to clean it regularly so that the toilet will be used more smoothly.

Expansion of capital

1. Blockage of hard objects in the toilet: Accidentally fall into plastic brushes, bottle caps, pancakes, combs and other hard objects when you use them. This kind of blockage can be directly dredged by a pipe dredging machine or a simple dredging device, and it is necessary to disassemble the toilet to dredge it when it is severe, and this situation can only be completely dealt with by getting things out.

2. Toilet aging and blockage: the toilet is used for a long time, it is inevitable that it will scale on the inner wall, and the severe time will block the vent of the toilet and form a slow toilet drainage.

3. Toilet device error: generally divided into: the outlet at the bottom is not aligned with the sewer outlet, and the screw hole at the bottom of the toilet is completely sealed, which will cause the toilet drain to be unsmooth, and the water level of the toilet tank is not high enough to affect the flushing effect.