-
Anonymous users2024-01-24You should mean the elevation. In the floor plan, you can see the composition of the entire wall, and the wall sketch is a detailed explanation of these components (materials, styles, specifications, etc.) For example, if you have a component on the wall, there will be a frame on the elevation drawing to enclose this component, connect a circle with an extension line, and mark (J|) in the circle10) or (J-10); The other is to use facets, I think you should look at facets, such as 1-1, A-A sections. Then you go to the wall sketch to find the sample represented by this code, and the sample will have a detailed explanation of the component.
First, look at the floor plan (i.e. architectural plan) to understand the dimensions of the balcony, i.e. the length and width, and the height and thickness of the baffle. Then look at the structural drawing, that is, the reinforcement structure (the size and spacing of the bottom plate reinforcement, the size, spacing and binding requirements of the cover reinforcement) combined with the section drawing and the node sample drawing, and see the size, spacing and height of the railing steel bar, whether it is a single row or a double row of reinforcement.
There are 2 ways to do this:
When you draw a planar route, enter the level. As shown below: >>>More
That's right, yes. The structure is 4CM lower, and there is a building screed on it, and the water is discharged, and there is 2CM left after the protective layer, but this is 2CM that can't do these.
How to install the toilet drain.
1. Before the installation of the toilet sewer pipe, first check whether the water pipe and related connecting accessories of the decoration building materials are damaged, cracks and other phenomena. 2. When installing the sewer pipe in the bathroom, the constructor should consider the thickness of the wall tiles in advance. 3. Use as little or no connection accessories as possible under the wall and the ground, so as to reduce the hidden danger of leakage, and the installation of connection accessories should be sure to be firm and no leakage. >>>More
Pay attention to the overall bathroom for waterproofing, and pay attention to thermal insulation and anti-freezing of pipes. Preference is given to the large slab ceiling (gypsum board) with good sealing.