What to do if the toilet does not go to water

Solution:

1. Open the main valve [also called angle valve] to determine whether there is tap water.

2. Open the lid of the water tank and observe that there is no water on the water tank. Whether the piston can be plugged. If you can't plug it, it will leak, and the water tank is not up to the switch, so you won't get on the water.

3. The toilet tank accessories are divided into three parts. The first is that the drain valve is directly below the button, and the second is the inlet valve, which is the part of the hose connected to the outside of the water tank, which is generally next to the drain valve. The third part is that the buttons are divided into full-row buttons and half-row buttons.

4. Close the toilet lid and check whether the button can reach the inlet valve, if it is, adjust the inlet valve to the position, and then see if the float or float of the inlet valve moves up and down freely. If you get stuck, the water won't get in. Generally, there are adjustable crosseyes on the pontoon, and you can twist it in a clockwise direction to see.

If the float is suspended in the air when there is no water, it means that it is broken and the water inlet is blocked.

5. Fill the water tank with water to see if the pontoon can float freely. If the problem of water inlet is solved. Then there is the problem of drainage, which is also the problem of flushing. See if the plug of the plug in the tank, also called the float, is damaged. Whether the float and button connection are loose. If it is loose, it can be tightened.

See if the button is resilient. It is easy to rust when the spring enters the water for a long time. The working principle of the toilet is nothing more than pumping--- storing water --- releasing water.

Hello: Are you saying that there is no water in the toilet tank? Is the angle valve behind the toilet not open?

If the angle valve is opened or the water does not come, it depends on whether there is a problem with the water inlet valve (you had better call the toilet seller to check it for you, and sure enough, there is no problem that the water pipe did not clean up the dust and scum inside before installation, and the angle valve is not blocked, and the water pipe can be installed again.)

If the toilet is not watered, it is generally a problem with the toilet tank, and you can change the toilet sanitary ware to the water. See if the water inside is stuck.

Look at your problem, don't use the water in use! One situation is that the water is stopped, if not, the filter at the hose and toilet interface is blocked by debris, and then the water supply component is stuck. Find the problem and it's easy to solve.

It's also possible that the water inlet valve below doesn't know who closed it... Embarrassment...