The kitchen wall cabinet has been installed, how to reinforce it

Updated on Kitchen 2024-05-12
3 answers
  1. Anonymous users2024-01-23

    Can you hang it. One thing to note. After pouring, directly fix the board with long screws, and they also plan to make wall cabinets in the same symmetrical position, then you have succeeded, lock a long wooden board with screws in the same symmetrical position of the two kitchens, the key is to see what the position of the wall is, that is to say, use two wooden boards to clamp the wall, and the screws will also be locked, after hitting the wall.

    If your kitchen is walled with a common hallway. If it is also a symmetrical position in another kitchen, in order to ensure sturdy, before inserting long screws. Then use a percussion drill to hit the wall eye, and pour cement mortar into the hole.

    Generally speaking, it is enough to hang the hanging cabinet after the wooden board is fixed for a week, or you can do it according to this method. In this way, the problem of the two hanging cabinets has been solved, and the hollow brick hanging cabinets I have encountered. Hope it helps.

    Wait until the cement mortar is dry.

  2. Anonymous users2024-01-22

    There are posts on the Internet that are very solid.

  3. Anonymous users2024-01-21

    Installed, why reinforced?

Related questions
2 answers2024-05-12

H-pipe leakage treatment method:

As shown in the subject's picture, it has been taken off, and you can go and buy a tube to connect it yourself. >>>More

7 answers2024-05-12

Apply with water to the point where the wall of the sewer pipe comes into contact with the floor.

1 answers2024-05-12

Because the renovation has been completed, the ground level has been found. Unless it is feasible to add a washing machine and wash basin to drain it - and look at how the pipes go downstairs to tell the specifics.

1 answers2024-05-12

Ventilation more, buy some pineapple, cut it open to absorb some of it.

7 answers2024-05-12

It's good to lift the lid on it, but you might have a broken float, just replace it.