-
The float rod and the white valve control lever are disconnected and connected, and when the float sinks, it is equivalent to pressing it by hand, and the water will enter when the valve is opened.
-
The white one and the blue one were changed, and I went to the store to buy them and put them on.
-
Broken, the problem with the float, change it.
Open the lid of the water tank to see if the float of the water supply valve is stuck or the plug is stuck, the water level is too high and exceeds the position of the float, that is, the sealing ring inside the water supply valve is broken, and it is recommended to replace it with a new one.
As long as there is water pressure in the water pipe, it will not flow backwards, and the water on the toilet bowl is set in the water tank and will not flow backwards.
The series of articles on hands-on activities at home are all things that the author has experienced in his life, providing maintenance reference for the majority of friends with weak hands-on ability. Living at home, there will always be such and such things that break, and it is not so difficult to repair, and you can do it. >>>More
1 All I am a professional maintenance personnel, which is most likely to cause two this: 1 Limescale adhesion of water parts. Make the water parts unlubricated. >>>More
Install it upside down, lift the float The valve should be closed, and it should not be watered. Otherwise, water will enter.