How to install custom furniture drawers

How to install the drawer slide.

1.For furniture drawers made on site by carpentry, it is necessary to install drawer pulleys. We first need to determine what the drawer's fancy track looks like, determine the length of the drawer, and then choose the size of the slide according to the corresponding specifications.

2.The installation method of drawers can be divided into low drawers and inner drawers, and the drawer panel of the low drawer still protrudes after the drawer is fully pushed into the box, leaving it on the outside and not in a straight line up and down. The drawer panel of the inner drawer enters the drawer as soon as the drawer is fully pushed into the cabinet and does not remain outside.

3.The drawer slide is divided into three parts: movable rail (inner rail), middle rail, and fixed rail (outer rail).

4.Before the installation of the slideway, the inner rail, that is, the movable rail, needs to be removed from the main body of the slideway, and care should not damage the slideway when dismantling. The method of disassembly is very simple, find the circlip on the inner rail and press it down and gently take out the inner rail.

5.The outer and middle rails in the split slide are installed on both sides of the drawer box, and then the inner rails are installed on the side panels of the drawer. If it is finished furniture, there are pre-made holes in the box and side panels of the drawer to facilitate installation, and if it is made on site, you need to punch holes yourself.

6.Finally, put the drawer into the box, pay attention to press and hold the circlip of the inner rail mentioned earlier when installing, and then slowly push the drawer parallel into the box and to the bottom. The movable rail and the fixed rail have been linked, and the drawer can be pushed and pulled freely.

Precautions for the installation of drawer slides.

1. First of all, the choice of size, the length of the slide rail of the drawer should generally be the length of the drawer pull, if the slide rail is too short, then the drawer will not reach the maximum opening and closing, if it is too long, it will cause the inability to install.

2. For the drawer slide, the installation is still a relatively simple thing, the key is how to dismantle, in some drawer slide how to dismantle the atlas, there are more detailed removal steps, through these steps can be well removed, so if you say that when you want to install, then you can reverse thinking, from the step of dismantling step by step to restore back, then you know how to install the drawer slide.