Is it good to use solid wood floor heating?

Solid wood flooring is not recommended for underfloor heating for the following reasons:

First, the moisture content of solid wood flooring is relatively high, as well as the texture characteristics of solid wood flooring, which are easy to cause cracking and deformation after heating.

Second, because solid wood floors are generally keeled, it is not conducive to laying.

In this way, air is formed between the heating cable and the floor, which is not conducive to the transfer of heat, affects the effect of floor heating, and causes waste of energy. Moreover, solid wood flooring is generally thicker than solid wood lamination, and Bunsen is not as fast as solid wood composite in terms of heat transfer. Based on the above reasons, it is generally not recommended to use solid wood flooring for floor heating.

The reasons why parquet flooring should be used for underfloor heating are as follows:

This is mainly because the formaldehyde content of solid wood composite is lower than that of reinforced composite, and the volatilization of formaldehyde after heating is relatively less. Of course, this is not absolute, it depends on the quality of the floor and the level of formaldehyde content. If it is an E0 level reinforced compound, it should be better than the E1 level solid wood composite.

The reasons why it is recommended to choose laminate flooring for underfloor heating are as follows:

1. Because the thickness of the composite floor is mostly 7 8mm, it is easy to conduct the heat generated by the geothermal system to the surface, and the surface of the composite floor is a wear-resistant layer of metal oxide, and the heat spreads very quickly and evenly on the surface. And the solid wood floor is relatively thick, the general thickness is about 2cm, and the keel should be played when installing, so the heat of the geothermal system is not easy to be conducted to the surface, and the thermal conductivity of the wood is very low, which will lead to the waste of heat, and will also make the surface temperature uneven, and the temperature difference is very obvious.

Second, the quality of imported flooring has reached the European Enpr13329 standard, and the quality of domestic flooring has reached the national GB T1802-2000 standard, which can adapt to the technical requirements of geothermal heating floor installation, and some qualified brands on the market have reached this standard. The effect of locking flooring is better, because there are small gaps between the hooked floors, so it is not easy to lose shape after expansion.

3. In order to increase heat conduction, the thickness of the cushion material and the floor should not be too thick, the standard thickness of the geothermal floor is 6 8mm for laminate flooring and 8 9mm for three-layer parquetIt is recommended that consumers choose carefully at the same time, try to choose a small size, preferably 200 40 10 square or herringbone shape, so that its heat deformation is uniform.

Very good, underfloor heating is a very comfortable way to heat. The indoor surface temperature is uniform, and the room temperature gradually decreases from bottom to top, giving people a comfortable feeling of warm feet and cool heads; At the same time, geothermal heating can promote foot blood circulation, improve blood circulation throughout the body, promote metabolism, and improve human immunity to a certain extent; Compared with air conditioning, heating, etc., compared with forced convection circulating hot air heating, the radiant heat dissipation of floor heating weakens air convection, reduces the spread of dust and harmful germs in the air, avoids excessive drying, and makes the environment more hygienic, clean and comfortable.