-
Anonymous users2024-01-24The balcony hanger is generally installed after the decoration, but the hole reservation for installation needs to be determined during the decoration, for example, the installation of the drying bar electric drying rack needs to pay attention to the reservation of the power cord and the reservation of the installation position.
-
Anonymous users2024-01-23Balcony hangers are installed after the renovation is completed.
It is inconvenient to dry clothes in the building, so it is recommended to install a drying rack on the balcony. Of course, if the living floor is low, you can choose to dry it outdoors; Alternatively, there is a terrace where you can dry your laundry, or you can do without a drying rack.
Most of the modern family balcony ceilings are made of aluminum gusset or PVC gusset, etc., which are generally about 10cm away from the top surface of the balcony ceiling, which requires automatic lifting of the drying rack to install it. It is understood that the automatic lifting drying rack is fixed on the top of the ceiling by expansion screws, and the balcony ceiling itself does not have a great load-bearing capacity. Therefore, if it is after the balcony ceiling, the automatic lifting drying rack can not be directly installed on the ceiling keel, and the best installation method is to pass through the ceiling ceiling decoration and directly fix the steel wire on the ceiling floor; If the balcony of a duplex structure or villa house is higher than that of an ordinary house, it is best for consumers to make an agreement with the merchant to confirm the height of the wire of the automatic lifting drying rack after the actual measurement, so as to avoid problems such as the clothes pole being too high and difficult to reach.
Look at your hanger is a hanging type, but also a ceiling type. Also, whether your ceiling is high or short, and whether there is a place to fix the hanger at the ceiling. If it is an integrated ceiling, it can be installed by opening a hole in the place where there is a main bone (compass).
Still. If the renovation project has not been completed, you can propose a modification plan with the construction party and ask for the installation of lifting drying racks. However, the resulting costs can be negotiated and resolved. >>>More
It depends on the load-bearing structure, which can not be installed without reinforcement, otherwise it will lead to the deformation and collapse of the aluminum alloy.