-
Anonymous users2024-01-24The energy-saving tank water valve is integral and will not break under normal circumstances, unless it is damaged by man. There is a trick, this situation is related to the buoyancy of the water, and then press the switch twice, and the water will naturally be turned off.
-
Anonymous users2024-01-23What you're talking about is basically a failure caused by a problem with the switch.
Summary. The pontoon assembly is improperly installed, so that the pontoon cannot float flexibly up and down, and it is necessary to clean up the debris and adjust the appropriate position; If there is a foreign object stuck between the inlet float and the small water tank, open the box to clean up the debris and adjust the position; If the position of the pontoon is adjusted too high, you need to pinch the adjustment card to lower the pontoon, or lift the rack up and lower the pontoon, so that the water level of the tank is 15mm lower than the overflow nozzle. >>>More
Dreaming that the toilet water can't be turned off means: You are good-natured, and you have been a little impatient in the past two days. I hope that my lover can share your worries and relieve you, but it is difficult to do so. >>>More
First, if it is leaking from the bottom of the toilet after flushing the toilet, and the water is not clear and has a peculiar smell, then it can be basically judged that the sealing ring on the drain pipe at the bottom of the toilet is not sealed, and the sealant on the edge of the toilet and the ground is not tightly sealed. This phenomenon mostly occurs shortly after the toilet is installed. >>>More
The toilet went to the automatic induction sanitary ware to help Sui because he was worried that there was a water leakage in Sun Qiusuo's follow-up, you can remove the hair, and then tighten the screws in it, generally speaking, the problem can be solved.
It should be that after the toilet flush switch is pressed, it can't reply by itself, so open the lid on the back and take a look.