-
Anonymous users2024-01-24The steps to install the squatting toilet are as follows:
1. The sewage outlet of the squatting toilet and the reserved mouth of the downspout are coated with adhesive or cement. Connect the sewage outlet of the squatting toilet with the reserved opening of the downspout, and correct the position of the squatting toilet. Brick to fix the squatting toilet, to reserve a gap for filling the gravel.
2. After the binder is dry, test the flush into the squatting toilet to observe whether the interface is leaking. Fill the ground with gravel soil between the ground and the squatting urinal, and it is strictly forbidden to really enter the cement concrete. Close the gap with bricks. Cement mortar on the outside of the bricks and paste tiles.
You don't know very clearly, add a switch or control the previous light or control the other, if you control the previous light, it is to make a double control.
I dreamed that it was not enough to go to the toilet with repair paper, and a man pulled out a lot of paper and explained to himself that his popularity is very good, and when you encounter difficulties, there will be others to help.
The trick to quickly unclog the toilet bowl is very practical.
If the crack is clear, you can go to the hardware store and buy a tube of glue. If you really can't do it, you have to buy a new one.
Toilet plugs, catfish will do.
There is also a soft steel pipe with a handle that can be shaken and shaken all the time, and then the steel pipe can reach in and dredge it. >>>More