Closed balconies, the population beams are coarse, and the steel bars are put up or down, and bricks

The reinforcement 25 threads of the beam are on the top, and the load-bearing beam reinforcement 25 threads are below.

This is to be calculated, not only the overhang meter, but also the length and size of the balcony, which directly affects the stress of the beam. If you build a house by yourself in the countryside, put four 20 steel bars, stirrups with 8, and the spacing is 150.

The cantilever lead beam requires that the upper steel bar of the cantilever beam should meet the quality assurance requirements, and the direct anchorage anchorage length is not less than 25 times the diameter of the steel bar, if the law enforcement requirements are not met, the upper steel bar should be bent anchorage, the length of the straight section of the bent anchor must be greater than or equal to the length of the straight section, and the length of the hook on the inner side of the deep support should be 15 times the length of the steel bar diameter.

Summary. Hello! I'm glad to answer this question, and I've given you the following answer: >>>More

Each span of the column with 18 centimeters of longitudinal reinforcement, 6 centimeters of stirrups, cantilever beam gluten 22 centimeters, bottom reinforcement of 20 centimeters, stirrups encryption of 10 centimeters. The rebar of the negative reinforcement of the one-way plate of the balcony is 10 centimeters, how many meters does the balcony float out??