What should I do if there is a large piece of ground exposed in front of the toilet with a new toile

Updated on Toilet 2024-05-27
2 answers
  1. Anonymous users2024-01-24

    Plaster with cement.

  2. Anonymous users2024-01-23

    Redo the bottom of the toilet bowl and wipe the bottom seam with water so that it does not leak.

Related questions
The inlet pipe behind the toilet was replaced with a new one, but what happened when the toilet did
1 answers2024-05-27

Wipe to see if the angle valve is open, if it has been opened, it may be that the filter screen of the water valve is plugged, close the angle valve and open the connecting hose, take off the filter at the inlet of the water valve to clean it, and then install it back in place, try to ---

What should I do if the new toilet is installed, and the front and bottom are a little leaky, and so
3 answers2024-05-27

Apply glass glue to the crevices under the toilet.

Since I got a new toilet, there is always a special smell in the room, and I feel that it is not new
2 answers2024-05-27

It is the glass glue that is beaten when changing the toilet, and it is necessary to maintain ventilation these days, and you can consider using an exhaust fan for ventilation. It's going to fall away.

My family has a new toilet, and the installer only uses silicone to fix it without screws, please do
3 answers2024-05-27

Nowadays, many people don't use expansion screws, so that the hole will also affect the waterproof, as long as the silicone can be laid well, and it will be strong.

Is it safe for people living in the room to have just changed the toilet bowl with glass glue
1 answers2024-05-27

The following is for reference.

The toilet bowl should be coated with acidic glass glue. >>>More