-
Anonymous users2024-01-23Wipe to see if the angle valve is open, if it has been opened, it may be that the filter screen of the water valve is plugged, close the angle valve and open the connecting hose, take off the filter at the inlet of the water valve to clean it, and then install it back in place, try to ---
The valve of the inlet pipe is at the top of the inlet pipe, when the water level of the water tank is low, the tap water will enter the water tank through the inlet valve, and when the water in the water tank rises to a certain level, the float that controls the inlet valve will be jacked up, and then the inlet valve will be closed. When the inlet valve is in the water, you can find its location by pulling the float by hand and looking at it.
Using gravity, the water balloon in the toilet bowl is originally designed according to the water pressure of the tap water, and if you switch to a bucket, you have to create the pressure yourself. >>>More
The toilet inlet pipe is 4 pipes, and the specifications of ordinary faucets at home are 4 pipes, so you should know what size wrench is.
The water inlet hose is leaking because it has been used for a long time, and it is enough to tighten it with a wrench.
Close the triangle valve, turn the hexagonal nut of the water inlet pipe counterclockwise to remove it, and tighten it clockwise when replacing it.