-
Anonymous users2024-01-24Dear, directly to the professional bricklayer master, for the floor drain can understand the use of gravity principle design of the very core floor drain.
-
Anonymous users2024-01-23The first is to solve the problem that the bathroom is not waterproof, whether you want to hardcover, simple or just temporary use, you need to do a good job of waterproofing.
Secondly, the bathroom is waterproof, it is recommended to choose the kitchen and bathroom waterproof slurry, the standard construction is that the ground needs to be done all, the wall should be at least done meters, it is recommended to do full height, if it is a lightweight wall, then it must be done full height, and at the same time, the construction only needs to be painted 2-3 times according to the product instructions, and the thickness is kept between.
Finally, on the issue of installing floor drains, it is recommended to consult local construction workers specifically, because they are more experienced and should not be difficult to renovate.
The electric water heater is installed, cut the hot and cold water tank on the wall, and the electric tank, and then fill the tank with cement after it is installed.
Not all school conditions are the same, and it is always a little uncomfortable to first arrive at the school, but it will be familiar and convenient in a few days.
It is better not to do this, it is recommended to install a wall-mounted one. At present, the wall-mounted ones also have lamp warmers or lamp warmers + wind warmers!
Some bathrooms have locks without a keyhole, but there is a notch in the original keyhole that can be opened by inserting a flathead screwdriver or coin into the recess and twisting it to the right.
Now the bathroom of this specification, the heating lamp is not easy to sell.