How to install the balcony thickness and height of the floor drain if it is not enough

Updated on Balcony 2024-05-15
1 answers
  1. Anonymous users2024-01-24

    Then you can only install an ultra-thin floor drain, and the installation height can be used when it reaches 5 cm.

Related questions
1 answers2024-05-15

If the width of the curtain shop is not large, it can be installed sideways. For spotlights, according to the actual situation, flexible application, it is not necessary.

1 answers2024-05-15

Judging from this CAD drawing, this side drain is reserved in the early stage. Can you make the picture clearer in the future?,This is a little unclear.。

2 answers2024-05-15

If the floor drain in the bathroom is not enough, it may cause water to spill out, increase the humidity of the bathroom, and may also affect the drainage effect of the bathroom, even if the stove will cause problems such as odor in the bathroom. Therefore, in this case, the following measures can be taken: >>>More

1 answers2024-05-15

Squatting toilets are usually divided into two types: with and without bending, the height with bending is generally 32 40 cm, and the height without bending is generally 16 20 cm. The installation height of the squatting toilet should be determined according to the specific squatting toilet used, so as to determine the reserved height of the sewer pipe. If the installation height of the squatting toilet is really to deviate, the cement platform is generally not less than 3 cm of the height of the squatting toilet, and the wall of the squatting toilet is generally 3 5 cm thick.

2 answers2024-05-15

The sliding door ramming rail has a ground rail and a hanging rail, and the height left is not enough to stick to the bottom plate, and if the ground rail cannot be installed, you can choose to replace it with a hanging rail, so that you don't have to do the engineering transformation. >>>More