When decorating, the floor tiles in the living room are striped, and the direction of the stripes is

The direction of tile texture in the living room.

1.Perpendicular to the TV background wall, this method visually allows the space to be more balanced and wide. Some living rooms are relatively long, so only the width of the tile texture corresponds to the space, and the space can be visually widened. But sometimes it doesn't look uniform.

2.Balanced with the TV background wall, this method is more visually unified and comfortable. But if the space is narrow, it will give the illusion that the space is narrow and long.

The following is how to pave wood grain tiles:

First, the commonly used wood grain tile paving methods, in addition to the traditional horizontal and vertical traditional paving methods, wood grain tiles also have herringbone, I-shaped, oblique diamond line and other paving methods.

Second, before laying wood grain tiles, the floor or wall of the paved building should be treated. Such as ground, interior wall, exterior wall, etc. Eliminate the buildup on the surface and pave it with a mixture of semi-wet cement sand.

3. Use a long thin line, coated with white ash or ink, determine the central axis of the brick, and then pave it according to the line.

Fourth, according to the plan to lay the varieties of bricks, pick out the distinction and put it away, so as not to be mixed up.

Fifth, wood grain tiles and polished tiles, antique bricks should be soaked in water before paving, be sure to soak with tap water or water, soaking time does not take too long, soak wet.

6. Cement and sand should be mixed in a ratio of 1:2, and cement with a grade of 325 should be used.

7. Take out the soaked wood grain tiles, wipe the water stains of the wood grain tiles, and then evenly apply the cement slurry on the back of the wood grain tiles, the thickness of the mortar is 2-3 cm, and then the wood grain tiles are laid on the cement sand surface of the ground, and the wood grain brick surface is gently knocked with a mallet until it is paved flat and the line is neat.

8. Paving should pay attention to the grain order of wood grain bricks, pay attention to the arrow marked at the bottom of the wood grain tile bricks, etc., and avoid empty knocking with the mallet, and the strength should be balanced, and the force should be avoided too large or too small. Use a plastic cross for paving bricks, which can better position the wood grain tiles.

9. After the wood grain tiles are paved and the cement is not completely dry, they can be observed with the naked eye or measured with a level, and the wood grain bricks can be trimmed according to the standard. Check the flatness of the brick paving, the straightness of the brick joint, etc. If the problem is found, it should be repaired immediately, and the wood grain brick will be seriously pried open and re-paved.

10. If you want to caulk, you should wait for the cement to dry and then use an iron hook to hook the joint, and then use the caulk with the matching color.