How do you change the toilet seat? Illustrate.

1. Find all the materials and put them on the lid for easy finding.

2. Place the rectangular frame in 2 holes.

3. Put the small screw frame on the left in the hole on the left.

4. Put the small screw frame on the right in the hole on the right.

<>< begged to shoot the blind waiter, Cai Shenhong, and attacked the noise.

Toilet seat, this needs to be replaced by a professional person!

2. The toilet lid is set on the top of the toilet bowl and is an accessory device of the toilet, which has the function of isolating bacteria.

3. Health protection: When the toilet is flushing, because of the relationship between water pressure, many bacteria can fly, because of people's habits, they generally have to bow their heads and button to flush, which means that bacteria will run to you with thousands of enthusiasm.

4. Reduce the sound of flushing: Waiting for guests, or in other inconvenient situations, closing the toilet lid can effectively reduce the sound of flushing.

5. Ordinary toilet seats have very small microorganisms that we cannot see with the naked eye: viruses, bacteria, fungi or parasites that cause infectious diseases. The most common are dysentery bacillus, Escherichia coli, common variant bacillus, Salmonella typhi, Staphylococcus aureus, Streptococcus faecalis, Streptococcus pyogenes, Candida albicans and other pathogenic bacteria, which may transmit infectious diseases such as SARS, AIDS, venereal diseases, skin diseases, liver diseases, and even cause death.

6. The official name of the toilet is the toilet, which is a covered bucket for urinating and urinating. The history of the toilet can be traced back to the Han Dynasty, when the toilet was called Huzi, which was dedicated to the emperor, and legend has it that it was made of jade. It was held by eunuchs who served the emperor at any time.

Later, in the Tang Dynasty, because there was a person named Li Hu in the emperor's family, in order to avoid secrecy, he changed the name of Huzi to Beast or Mazi. After that, in the circulation, it evolved into the name of the toilet. With the development of science and technology, there are many novel varieties, such as the use of siphon, spiral siphon and jet siphon, super-spin siphon and other principles of flush toilets.

Many people will encounter a time when the toilet seat is broken. So how do we replace the toilet seat when it is broken? Let's take a look at the knowledge of changing the toilet seat.

Change the toilet seat -?Netizens provide solution 1: When changing the toilet lid, we need to remove the fixing bolts on the back of the toilet to replace it; When installing, you can operate in the opposite direction.

There is no difference in size of the general toilet seat, just adjust the two bolts when installing. But you also need to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace! Change the toilet seat -?

Netizens provide solution two: Go around the toilet bowl to see where the screw cap of the toilet lid is, then choose a suitable wrench, just take off the screw cap, the position of the screw cap of the toilet cover is divided into two types: bright and dark, the bright place is easy to find, but the screw cap in the dark is not easy to see, the general position is set at the edge of the toilet tank, so open the lid, put your hand in, and feel the direction of the water tank to see if there is a screw cap. To install the toilet seat, you need to remove the fixing bolts at the back of the toilet, remove the previous toilet cover, and then replace the new toilet seat with a fixed screw cap.

At present, most toilet seats are large and small, as long as the screws at both ends of the toilet are done. However, the size of the toilet bowl must be measured before changing the toilet lid, and the width and length of the screw cap from the toilet lid also need to be determined. So as not to buy products that do not fit.

Change the toilet seat -?Netizens provide solution three: Different styles of toilet seats are installed differently, in general, the bottom end of the toilet lid is connected to the position of the toilet, and the back is screwed up, as long as you reach down and find it, you can take off the entire cover by unscrewing the screws on both sides, it's very simple, you can try.

Change the toilet seat -?Netizens provide solution four: You can find a professional to replace it for you.

So how much does it cost to change a toilet seat? If you are looking for a professional team, then the price cannot be determined, because there will be differences in the fees of each place and each person, and it is impossible to give an exact figure.

In order to be easy to use, of course, you will first try it yourself to see if you can complete the removal and installation of the toilet seat, different styles of toilet seat installation are also different, today I will share with you some of my experience in changing the toilet seat.

Method 1: When replacing the toilet seat, you only need to remove the fixing bolt on the back of the toilet to replace it, and operate it in the opposite direction during installation. Most toilet seats are large or small, and you can simply adjust the two bolts when installing. But you also need to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat to replace!

Method 2: Find the screw cap, remove it with a live hand, and replace it with a new one. Generally, the position of the screw cap is not easy to find, some are in the light, and some are in the dark. In the dark place of the screw cap, inside the toilet bowl against the side of the tank, open the lid.

If you put your hand in it and touch it upwards and in the direction of the tank, you should be able to touch it, but you can't see it.

Method 3: Different styles of toilet lid installation are also different, generally the bottom end of the toilet lid is connected to the position of the toilet bowl, which is screwed up behind it, as long as you reach down to find the screws on both sides of the screw, you can take off the whole cover, very simple, you can try.

But you also need to measure the size, the distance between the screw holes, the width and length of the toilet seat, and then buy a new toilet seat for replacement (it is recommended to choose an ultra-thin smart toilet seat, which is almost the same thickness as other toilet seats, and has many functions, so that your toilet can really become a pleasure).

Just take it off and replace it.

Find out the brand and model of the toilet first, and then buy it directly online.

It's very easy to install, and it is usually directly snapped on.

Do I need to open the toilet bowl when I disassemble and assemble the toilet lid, and what should I do if I don't open the fixed bolt and it is not easy to screw it?

The toilet seat, the back of the child should have two fixed rivets, which can be replaced when taken down