Can solid wood furniture with moisture be painted?

Updated on Solid wood 2024-04-04
2 answers
  1. Anonymous users2024-01-23

    Whether it is solid wood furniture or panel furniture, it contains a certain moisture content, generally speaking, the south needs to be controlled below 14%, and the north needs to be controlled below 12%. Otherwise, the paint effect will be very poor (the moisture in the wood will adhere to the primer and the wood, and the transparent paint will fog, while the non-transparent paint will not see the fog, but the adhesion will be greatly reduced, and the paint will easily fall off.)

  2. Anonymous users2024-01-22

    Solid wood itself is water-containing, and generally the moisture content of 8% or 20% is no problem with lacquer. If the moisture content exceeds 20%, the oil-based paint will turn white. If the moisture content exceeds 35%, water-based paint may not adhere well.

Related questions
24 answers2024-04-04

Some also have formaldehyde, some do not, and can be detected in the following ways: >>>More

4 answers2024-04-04

Solid wood furniture does not necessarily have only advantages and no disadvantages, pure solid wood furniture has high requirements for craftsmanship and materials. The selection of solid wood, drying, finger jointing, seams and other requirements are very strict, if which process is not strict, small cracking, loose joints and other phenomena, large then the whole set of furniture deformation, so that it can not be used.

2 answers2024-04-04

Solid wood furniture is not completely solid wood, the main frame is solid wood, some back panels, drawer bottom panels, etc. are not solid wood, and the paint also contains formaldehyde, so solid wood furniture is formaldehyde.

2 answers2024-04-04

This depends on how the solid wood furniture is connected and what the finishing process is. If the connection method is glue, the painted paint is not environmentally friendly, and if it is unqualified, it is likely to contain formaldehyde. So when buying, you should learn more.

6 answers2024-04-04

You can bring it back to the company to spray paint, but you have to polish it first and then spray it. In this way, the service life is not affected, otherwise it will increase over time. It's going to be layered! >>>More