-
Anonymous users2024-01-23This depends on the water pipe, if the width of the water pipe is in centimeters, then the spacing should be greater than centimeters.
What is a Mixing Valve:
Users can adjust the temperature of hot and cold water mixing according to their needs, and the required temperature can be quickly reached and stabilized to ensure that the water temperature is constant, and is not affected by changes in water temperature, flow rate and water pressure, so as to solve the problem of hot and cold water temperature in the bathing center. A temperature-regulating mixing valve, it comprises a valve body with a hot water inlet, a cold water inlet and a mixed water outlet, a valve core is arranged at the intersection of the middle part of the valve body, a handle is fixed on the valve stem of the valve core, a adjusting screw is arranged on the valve body outside the valve core, the adjusting screw passes through the valve body and is connected with the rotating body of the valve core, a flow regulating device is equipped with a flow regulating device at the water inlet, the flow regulating device is provided with a pipe joint connected with the water inlet, a piston is arranged in the pipe joint, the piston is also equipped with an adjusting body on a sliding ground, and a flow regulating hole is opened on the wall of the adjusting body, A compression spring is installed between the adjusting body and the outer edge of the piston. When the water temperature is adjusted, the rotating body of the valve core is fixed by the adjusting screw, then the water temperature changes without mismovement, and there is no need to re-adjust it when it is used next time, and the flow adjustment device is also installed at the water inlet to ensure that the water inlet remains unchanged, so as to keep the water temperature constant.
-
Anonymous users2024-01-22Around 18. The basin depends on the actual basin you choose.
-
Anonymous users2024-01-21The shower is 150mm
The basin depends on the actual basin you choose.
-
Anonymous users2024-01-20150mm__200mm
There are relevant standards, and the distance between the two needs to be 10-15 cm or more. >>>More
The reason why there are three holes is because there is more than one type of mixing faucet, there are three independent connections combined, such as the hole in the middle is installed with the water outlet, the holes on both sides are installed with cold water switches, hot water switches, the link of the mixed water is combined together with a connecting pipe under the basin, some basin drains have a movable cover, the cover is connected with a connecting rod, the connecting rod is directly behind the faucet, and the pull-out type, this pull rod is installed in the hole in the middle, so it is necessary to make a three-hole basin, a general-purpose basin, As for the spill (the overflow, which is the round hole in the façade in the recess on the inside of the basin), that is the real overflow.
Labor wages? About 600.
If you are using an electric water heater, close the inlet valve of the electric water heater, if it is solar, close the main valve of the solar water, and if it is a gas water heater, close the main valve of the tap water.
Is it caused by sand in the filter of the cold faucet?