-
Anonymous users2024-01-231. Confirm that the water parts inside the water tank are installed correctly and tightly. It can be closed with glass glue at the bottom of the water inlet and the junction of the water tank. The bottom of the flush part is also treated.
2. Confirm that the rubber ring at the connection between the water tank and the toilet body is elastic enough, and the connection between the water tank and the toilet body is tight enough.
3. Apply neutral glass glue to the rubber ring between the water tank and the toilet.
4. Before the construction of the glass glue, please wipe the sizing part dry (absolutely dry). It is best to keep it without water for 24 hours after construction.
-
Anonymous users2024-01-221. Drain the water, glue the bottom with glass glue a little thicker, and do not use it every two days. 2. Replace the toilet with a new one.
-
Anonymous users2024-01-21Hello, if you want to solve it completely, it is recommended that you knock out the toilet, and then clean up the residual garbage in the circle below, and then re-glue it with waterproof glue (glass glue) according to the original traces, and then put the toilet back in its original position, pay attention to see if the surrounding area is not in place, and then do not use it within 24 hours, and the glue can be dried.
-
Anonymous users2024-01-20If the toilet leaks, it can't be used, so you can find someone to fix it.
Just seal it with glass glue. Wipe the base dry first, then seal it with glass glue, and then use it when it is dry.
Find out why? It's a leak in the water pipe buried in the ground, and in retrospect, the water pipe is going, digging up and checking, and I'm taking advantage of the "ten." One: "That's it."
How to deal with a leaky toilet:
1.Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. >>>More
Ceramic can only be replaced with an entire toilet.
The plastic water tank can be temporarily glued with AB, and the water tank has to be replaced for a long time. >>>More
Kitchen storage space design: more than 30 square meters of snail dwelling into 24 houses, IKEA IKEA is very creative design, SOHO people, perfect and comfortable house, bar kitchen, elegant humanistic home, entrance restaurant, 1Check if the flush switch is reset. The plastic flush switch of some flush toilets will occasionally get stuck after being worn for a long time and cannot be restored. >>>More