-
Anonymous users2024-01-23The main reasons for tile cracking at the sunny corner are as follows:
1. When the tile touches the corner, the back chamfer process destroys the ceramic glaze bonding layer of the tile.
When paving tiles at the sunny corner and using the 45° chamfering edging on the back, if the worker is not careful, it is easy to cause damage to the embryo glaze bonding layer of the tile, which leads to the reduction of the anti-cracking performance of the tile, and then leads to the cracking of the tile at the joint of the sunny corner.
2. The base treatment or construction of the ventilation duct is unqualified.
In the process of tiling tiles, the dry ventilation ducts are not sprinkled with water, and the cement mortar behind the tiles is unevenly applied, which may cause the tile to be paved with hollow drums, resulting in cracks at the joints.
Can be used separately. That is: either make holes in the walls of the kitchen room so that the pipes between the kitchens lead directly to the outside; Either make holes in the walls of the bathroom and open the ventilation ducts of the bathroom to the outside.
It's possible.
It is recommended to find a board with a similar color (such as aluminum-plastic panel, paint-free board, etc.), dig a hole according to the diameter of the air duct, glue the board to the wall, and then glue the pipe. >>>More
There are a variety of practices on the atlas, so you can choose according to your needs.
There must be an impact, otherwise do the ventilation duct is very much, your own villa is blocked casually, if the downstairs is another household, then it will not work, and the property will come to you at that time.
The engineering quantity of the toilet ventilation duct and the kitchen flue, that is, the height should be calculated from the first floor to the height of the roof plus 600 mm, and the drawings are marked according to the drawings. >>>More