-
Anonymous users2024-01-23If the mobile phone is flooded, you need to perform the following operations: 1Disassemble the whole machine and prepare it for use with the appropriate screwdriver.
2.When removing the screen, gently separate the chiplet that connects the screen to the motherboard from the motherboard. 3.
Before removing the metal shielding isolation layer, be sure to tear off the card slot sticker under the network access card and the network access card. 4.Take a hair dryer and blow dry, not blowing at the screen for a long time, such a high temperature will destroy the screen5
Blow the front and back of the motherboard to ensure that there is no moisture left, and try to blow out the water at the earpiece. 6.Put the disassembled mobile phone in a noisy place, preferably for about two days, and then install it.
The toilet inlet valve is generally not easy to break, and sometimes the water level of the water tank is too high, you can lower the float valve by a point.
Blowing down the tomb and collecting the Xi collection system to seek the kind of gluttony The waste of water is a very troublesome problem. >>>More
If you look at the inner core of the toilet, it must be inflexible or leaky due to aging.
It's okay to change a triangle valve, and buy a good quality all-copper triangle valve, so that it will not break down often in the future.
The top is to fill the basin with water, and if you can't adjust it, it's dead, and the bottom is to fill the water tank, which can be adjusted, and its level directly affects the amount of the water tank.