-
Anonymous users2024-01-23The flexible materials are mainly coils and linoleums. At present, the better choice is polymer waterproofing membrane, which is convenient for construction and has good waterproof effect, followed by modified asphalt linoleum, while paper tire linoleum has been gradually eliminated and should not be used again.
Now indoor waterproofing, generally with waterproof coatings, you can first clean up the working surface, and ensure the dryness of the construction surface, and then brush waterproof coatings, you can choose better quality waterproof coatings, such as: Oriental rainbow or Jindun two-component waterproof coatings can be, each time do not brush too thick, after the whole time, there is a layer of waterproof membrane formed, after the coating is thoroughly dried, you can pave bricks.
-
Anonymous users2024-01-22...It's too general, if it is opened, of course, it is to change the problem of the pipe, if the bathroom drain pipe leaks downstairs, all the complex ones are opened and redone, and the simple pipe leakage is dug to the bottom of the pipe with flexible waterproof materials.
-
Anonymous users2024-01-21If the pipe is leaking, if it is a water supply pipe, replace the leaking pipe or fittings. If it is drainage, it can also be replaced, but where it cannot be replaced, it can be solved with the plugging king.
Wrapping is carried out at the time of renovation. Generally, Ette board or brick wall building is used, and some people use large core board or MDF.
When sealing the toilet, one is white cement, and the other is professional glass glue. White cement is not a material for professional sealing toilets, so there are very few white cement nowadays. The sealed toilet bowl is made of professional sealing material, that is, glass glue. >>>More
The subject should be talking about guarantees! There are many ways to ensure the bathroom, and there are many kinds of tiles that can be pasted on the outside after the guarantee! >>>More
It depends on the degree, if it is not serious, you can try it with glass glue first. The suggestion is to check the cause of the water leak first:1If it's a plumbing problem, it's time to fix it first and then redo the waterproofing 2If it is a problem with the waterproof layer, it is necessary to knock off the original tile and redo the waterproofing.
The pipes are straight up and down, and can be plugged in the gaps of the pipes with red bricks and cement mortar, so that the red bricks and the pipes are basically kept on a plane, and the outside is slightly painted to form a right angle, and then the tiles are pasted on the outside, so that they do not occupy space, but also very firm.