-
Anonymous users2024-01-23How to measure the size of your door.
1. International door measurement method: that is, standing 2000 mm away from the door opening, visually measuring with your eyes, the verticality of the left and right walls and the top wall, width and height (considering the height of the floor) shall prevail at the narrowest point, and the thickness shall prevail at the widest point, and the data shall be measured with an international tape measure respectively.
Second, the Chinese measuring door method: that is, first use our standard 5-meter tape measure to measure the width (upper, middle and lower three points), and then measure the height (left, middle, right three points), and then take the minimum value of the upper width and height as the target size. Finally, measure the thickness of the wall, measure the thickness of the left and right walls and the top wall respectively, take the maximum value as the target size, and measure the relevant data (the width error standard is 40mm, the height error standard is 30mm, (the width and height of the same household or the same floor are best uniform).
1.Measurement of door openings.
The width of the door opening: the distance between the left and right of the door hole is measured horizontally, and more than five measurement points are selected for measurement, wherein the minimum value (minus the adjustment margin of the door frame) is the width of the door frame.
The height of the door opening: vertically measure the distance up and down the door opening, select more than three measurement points for measurement, and the minimum value (minus the adjustment margin of the door frame) is the extension of the door frame to tell the size: (Note
In the process of measurement, it is necessary to pay attention to the ground treatment, and reserve the thickness of the ground decoration materials for the need).
The wall thickness of the door opening: measure the wall thickness horizontally, select more than five measurement points for measurement, the maximum value is the wall thickness, if the wall needs to be decorated, the thickness of the door opening wall needs to be attached to the thickness of the decoration material.
2.Measurement of the door leaf.
Door leaf = empty inside the door frame - reserved gap.
Width of the door leaf: Measure the empty distance of the door frame horizontally, and select more than five measurement points for measurement, of which the minimum value is (minus the reserved gap) is the width of the door leaf.
The height of the door leaf: vertically measure the empty distance of the door frame, select more than three measurement points for measurement, of which the minimum value (minus the reserved gap) is the height of the door leaf, note: in the measurement process, pay attention to the ground treatment, to reserve the appropriate size for the need.
Door leaf height The height of the door opening (the difference is 5-10mm).
The thickness of the door leaf is 38mm and 45mm, and it should be matched with the door frame.
The size of the woodworking ceiling is measured according to the axis of the wall, which is the national standard.
Materials to be prepared: meter rulers.
1. The measurement should be measured from one edge line of the sofa seat surface to another edge line. >>>More
Ergonomic interior design size is generally in the decoration company design must consider the relationship between the interior space and furniture and the human scale, in order to facilitate the decoration of interior design, some of the most commonly used sizes are the size of the wall, the baseboard is 80 200mm high, the general wall skirt is 800 1500mm high, and the height of the hanging mirror line is 1600 1800mm, which is the height of the center of the painting from the ground, which is also based on the average value of most human scales.
Interior door size measurement method:
1. The main lighting surface of a building or room is called the opening room, and the perpendicular one is called the depth. All the rooms in the room are composed of horizontal and longitudinal walls, between the horizontal walls and the horizontal walls are called open rooms, and between the longitudinal walls and longitudinal walls are called depths. >>>More
This depends on the specific situation of the construction site, and the actual size of the normal situation is the processing size of the security door after subtracting 5mm. When customizing the security door, as long as there is an actual size, the processing inspector will know how to do it.