Furniture with open lacquer or closed lacquer is good for long term preservation

Updated on furniture 2024-04-11
1 answers
  1. Anonymous users2024-01-23

    I think it's open paint, but the price is high, the following is the specific difference, you can refer to the open paint has full open and semi-open. Also known as water whitewashing. The principle is to preserve the pores of the natural wood and highlight the sense of mechanism.

    If the pores are completely covered, it is an ordinary sealing process. If the wood is soft, you can also use a hand brush, such as fir wood. If the wood is hard, it must be painted.

    Open paint is a kind of wood coating process relative to closed paint, which is a popular process in European high-end furniture in recent yearsOpen paint (mainly nitro paint) is a finishing process that completely exposes the pipe holes on the surface of wood, and its main component is polyurethane, with a small concentration, which is manifested as obvious wood holes, clear texture, small paint coating amount, matte, strong natural texture, and can be repaired twice.

    However, its cost is high, and the requirements for spraying technology are high, requiring more than six or seven or even ten times. The bottom wiping process does not use modern mechanical spraying, but uses manual wiping to treat the furniture with color paste and paint. The process can ensure that the color paste is firmly attached to the surface of the veneer, and can be synchronized with the wood when the temperature changes, and the wood can be synchronized with the thermal expansion and contraction, and the second can make the wood grain bright color, outstanding texture and natural, and at the same time, the color paste and paint directly penetrate into the wood eye, which is not easy to fade and not choose the color.

    Closed paint (polyester paint-based) is a finishing process that deeply buries the wood pipe hole in the transparent coating layer as the main feature, its main component is unsaturated resin, high concentration, and is manifested as the furniture surface coating film is plump, thick, bright, smooth surface, only needs two bottoms and two sides to complete the work, and now the furniture on the market mostly adopts this paint process.

Related questions
3 answers2024-04-11

There is no problem, the white with oak color itself is a classic pastoral feeling, there are only some American products, Lao Tong has the same dining table panel made oak color, the legs are made white, the chair is also the same as Shishantan, the seat board oak color, the backrest and feet are made white, a very classic match.

2 answers2024-04-11

Hello landlord, the price difference between the general open paint and closed paint is 50 yuan -100 yuan, the open paint is more expensive, and the price difference is different due to different manufacturers, I said that the price is basically most of the manufacturers, you can understand the ancient moon house wooden door.

1 answers2024-04-11

It depends on what kind of furniture is made, the south likes light-colored mostly light red, and the north likes dark colors and mainly dark red. Red is popular in our country.

4 answers2024-04-11

The paint is still the same paint, the composition is the same. It's just that the construction is different, and the effect is different! >>>More

9 answers2024-04-11

As a qualified homeowner, we are now pursuing how to decorate our house to look better, and the safety of its decoration is also a standard to consider, and it is also for the safety of our families. After that, the price of its decoration is also a point of consideration, so every time you decorate the house, it is a very nerve-wracking thing. >>>More