-
Anonymous users2024-01-23First of all, you have to understand what circuit the switch you are powering off controls it.
It feels like you're pulling the wrong one.
In addition, it is possible to induce electricity.
You can plug in an electrical appliance in fact, can you use it.
-
Anonymous users2024-01-22Do you use a voltage tester to measure whether there is electricity or can you use the appliance normally.
The thickness of the edge of the socket panel is about 1 mm, and it cannot be fixed by gluing. No matter how good the glue is, there is an aging process, not to mention that there is water vapor in the bathroom, which cannot stand the test of time. The correct way should be fixed with screws (remove the panel, there should be two screw holes on the socket), put the sealing ring of the waterproof socket box and the wall, press it well, and tighten the screws, which is the correct way to fix. >>>More
The line seems to be small, but it doesn't work. Replace the thick wires.
The water heater is a high-power electrical appliance, which generally pulls a separate route and opens it separately, with a leakage protector. >>>More
1. First of all, it must be equipped with an independent three-eye fixed socket, and the circuit is a special branch circuit for electric water heaters, such as mobile wiring boards, sockets with switches, non-independent sockets, aging sockets, and loose sockets. Don't use it! These can cause hot plugs, sockets, and wiring, and in serious cases, it may be a fire! >>>More
You're so professional, you know equipotential.
The water heater power supply must have a grounding wire (repeated grounding). >>>More