-
Anonymous users2024-01-23The bathroom bath bomb lighting is turned on separately and slightly bright, and on the basis of turning on the lighting, turn on the air heater or ventilation or plug a hair dryer into the socket is normal, and a power supply cannot use multiple plugs.
-
Anonymous users2024-01-22The situation you said is definitely not normal, the wiring of the bath bomb is not complicated, remove the bath bomb one by one to check whether the joints are solid, if normal, and then remove the switch to check whether there is a connection line is not real, as long as there is a virtual wiring will cause failure, and there are potential safety hazards, if you do not understand the circuit, it is best to ask a professional to troubleshoot.
-
Anonymous users2024-01-21If there is a problem with the bathroom line, it should be that the joint of the bathroom zero line is not in good contact.
-
Anonymous users2024-01-20It should be a mismatch between the voltage and the bathroom bath bomb.
-
Anonymous users2024-01-19How to fix it,? Mine has this problem too.
It may be the cause of treatment. You can find better quality ones on Taobao.
The bath bomb uses a special infrared quartz heating bulb as a heat source to heat the indoor air through direct radiation, and does not need to be preheated, so it can obtain a wide range of heating effects in an instant. Its function is heating, ventilation, lighting, using 2 or 4 275W hard quartz explosion-proof bulbs for heating, the effect is concentrated and strong, you can heat as soon as you turn on the light, no need to preheat, very suitable for people with a fast pace of life. The 2-in-1 bath bomb is specially designed for those who have installed a ventilation fan or a low bathroom, or an old house bathroom, and is characterized by easy installation. >>>More
Check whether the metal sheet in the lamp center is displaced, check whether the ballast is broken if there is a ballast, check whether the wiring is loose on the terminal on the bath bomb, and whether the wiring in the panel switch is loose, pay attention to turn off the power during operation to prevent the problem from occurring.
When the light in the bathroom bomb light is broken, we can take the following steps to repair it: >>>More
Poor contact.
The bathroom bath bomb refers to the lighting here sometimes on, sometimes not on, mostly because of poor line contact. It is recommended to check whether the wiring of the lamp head and switch post is loose or not, and if it is tightened, the problem will be solved. >>>More